Perovskite decomposition in detail: Solar cells are subject to heating when operating in sunlight, and the organic components of hybrid perovskite solar cells, especially the commonly used methylammonium cation, can undergo thermal decomposition. Encapsulation can limit decomposition by bringing such reactions to equilibrium and can prevent exposure to damaging ambient moisture. Shi et al. examined several encapsulation schemes for perovskite films and devices by probing volatile products with gas chromatography–mass spectrometry (see the Perspective by Juarez-Perez and Haro). Pressure-tight polymer/glass stack encapsulation was effective in suppressing gas transfer and allowed solar cells containing methylammonium to pass harsh moisture and thermal cycling tests. Science , this issue p. eaba2412 ; see also p. 1309
Methylammonium bismuth (III) iodide single crystals and films have been developed and investigated. We have further presented the first demonstration of using this organic–inorganic bismuth-based material to replace lead/tin-based perovskite materials in solution-processable solar cells. The organic–inorganic bismuth-based material has advantages of non-toxicity, ambient stability, and low-temperature solution-processability, which provides a promising solution to address the toxicity and stability challenges in organolead- and organotin-based perovskite solar cells. We also demonstrated that trivalent metal cation-based organic–inorganic hybrid materials can exhibit photovoltaic effect, which may inspire more research work on developing and applying organic-inorganic hybrid materials beyond divalent metal cations (Pb (II) and Sn (II)) for solar energy applications.
We apply gas quenching to fabricate rubidium (Rb) incorporated perovskite films for high-efficiency perovskite solar cells achieving 20% power conversion efficiency on a 65 mm2 device. Both double-cation and triple-cation perovskites containing a combination of methylammonium, formamidinium, cesium, and Rb have been investigated. It is found that Rb is not fully embedded in the perovskite lattice. However, a small incorporation of Rb leads to an improvement in the photovoltaic performance of the corresponding devices for both double-cation and triple-cation perovskite systems.
Mixed halide perovskites CH3NH3PbBr3−xClx (x = 0.6–1.2) with different compositions of halogens exhibit drastically changed optical properties. In particular, the thin films prepared with these perovskites demonstrate extraordinary photoluminescence emission intensities and prolonged recombination lifetimes up to 446 ns, which are desirable for light emitting and photovoltaic applications.