Applying a voltage to metal electrodes in contact with aqueous electrolytes results in the electrolysis of water at voltages above the decomposition voltage and plasma formation in the electrolyte at much higher voltages referred to as contact glow discharge electrolysis (CGDE). While several studies explore parameters that lead to changes in theI–Ucharacteristics in this voltage range, little is known about the evolution of the structural properties of the electrodes. Here we study this aspect on materials essential to electrocatalysis, namely Pt, Au, and Cu. The stationaryI–Ucharacteristics are almost identical for all electrodes. Detailed structural characterization by optical microscopy, scanning electron microscopy, and electrochemical approaches reveal that Pt is stable during electrolysis and CGDE, while Au and Cu exhibit a voltage‐dependent oxide formation. More importantly, oxides are reduced when the Au and Cu electrodes are kept in the electrolysis solution after electrolysis. We suspect that H2O2(formed during electrolysis) is responsible for the oxide reduction. The reduced oxides (which are also accessibleviaelectrochemical reduction) form a porous film, representing a possible new class of materials in energy storage and conversion studies.
23 February 2023 in The Journal of Physical Chemistry C
Nanoporous Au (NPG) films have promising properties, making them suitable for various applications in (electro)catalysis or (bio)sensing. Tuning the structural properties, such as the pore size or the surface‐to‐volume ratio, often requires complex starting materials such as alloys, multiple synthesis steps, lengthy preparation procedures or a combination of these factors. Here we present an approach that circumvents these difficulties, enabling for a rapid and controlled preparation of NPG films starting from a bare Au electrode. In a first approach a Au oxide film is prepared by high voltage (HV) electrolysis in a KOH solution, which is then reduced either electrochemically or in the presence of H2O2. The resulting NPG structures and their electrochemically active surface areas strongly depend on the reduction procedure, the concentration and temperature of the H2O2‐containing KOH solution, as well as the applied voltage and temperature during HV electrolysis. Secondly, the NPG film can be prepared directly by applying voltages that result in anodic contact glow discharge electrolysis (aCGDE). By carefully adjusting the corresponding parameters, the surface area of the final NPG film can be specifically controlled. The structural properties of the electrodes are investigated by means of XPS, SEM and electrochemical methods.
24 August 2022 in Journal of Vacuum Science & Technology A
Plasma in-liquid by means of anodic contact glow discharge electrolysis (aCGDE) is a growing research field allowing the selective modification of the electrode and the electrolyte. The aim of this proof of concept study is to demonstrate that auxiliary electrochemical electrodes placed in the vicinity of the plasma electrode can be modified by aCGDE (ignited at the anode by applying a DC voltage between the driving electrodes). Furthermore, we illustrate in how far such auxiliary electrodes can be used as a probe to detect products (in particular, H2, H2O2, and O2) formed in the solution by aCGDE via electrochemical techniques. In this work, aCGDE is achieved by applying a voltage of 580 V to a small Pt wire (plasma electrode) versus a large stainless steel counter electrode. An auxiliary Pt electrochemical working electrode, operated in a three electrode configuration, is placed at different distances from the plasma working electrode. Depending on the distance, we find small changes in the working electrode structure. More importantly, we will show that, in principle, the local H2O2 concentration in the electrolyte can be monitored operando. After aCGDE, the concentration changes with time and depends on the distance from the plasma electrode.
Nanoporous Au has different properties compared to bulk Au, making it an interesting material for numerous applications. Depending on the preparation procedure, the porosity, thickness, and homogeneity of the NPG films can be tuned. To modify the structure of NPG films in a targeted manner and thus adapt them to specific applications, a fundamental understanding of the structure formation is essential. In this work, we focus on NPG prepared from Au oxide formed during high voltage electrolysis in an alkaline electrolyte on a poly-oriented Au single crystal electrode. These poly-oriented single crystals consist of a single crystalline metal bead, with faces with different crystallographic orientations. Consequently, these POSCs allow screening of the influence of the crystallographic orientation on the structure formation of the Au oxide formed during high voltage electrolysis and the NPG film formed via electrochemical reduction of the Au oxide for different facets in a single experiment. The high voltage electrolysis is performed at current densities between 2.70 and 3.76 A / cm² (300 V) and between 0.24 and 6.39 A / cm² (540 V) with electrolysis times ranging from 100 ms to 30 s. The amount of Au oxide formed is determined by electrochemical measurements and the structural properties are investigated by scanning electron microscopy and optical microscopy. We show that the Au oxide formation is mostly independent of the crystallographic orientation except for thick Au oxide layers. In turn, the macroscopic structure of the NPG films depend on the experimental parameters, the thickness of the Au oxide precursor thickness, and the crystallographic orientation of the substrate. Possible reasons for the frequently observed exfoliation of the NPG films are discussed.
Applying a voltage to metal electrodes in contact with aqueous electrolytes results in the electrolysis of water at low voltages and plasma formation in the electrolyte at high voltages referred to as contact glow discharge electrolysis (CGDE). While several studies explore parameters that lead to changes in the I-U characteristics in this voltage range, little is known about the evolution of the structural properties of the electrodes. Here we study this aspect on materials essential to electrocatalysis, namely Pt, Au, and Cu. The stationary I-U characteristics are almost identical for all electrodes. Detailed structural characterization by optical microscopy, scanning electron microscopy, and electrochemical approaches reveal that Pt is stable during electrolysis and CGDE, while Au and Cu exhibit a voltage-dependent oxide formation. More importantly, oxides are reduced when the Au and Cu electrodes are kept in the electrolysis solution. We suspect that H2O2 (formed during electrolysis) is responsible for the oxide reduction. The reduced oxides (which are also accessible via electrochemical reduction) form a porous film, representing a possible new class of materials in energy storage and conversion studies.