Automated stone manufacturing has undergone considerable development in recent years. Thanks to international research dealing with the cutting, sawing and grinding of different natural stones, processing time shortens and tool-life lengthens. However, the process of stone milling has not been extensively examined yet, primarily because of the novelty of this technology. The aim of the research described in this article is to examine how variable cutting speed affects the quality of workpiece edges while milling granite materials. For the research, sample surfaces were formed on five granite slabs with different average grain sizes using five cutting speed values. Afterwards, changes in the average surface roughness and average edge chipping rate were examined. From the research results, it can be concluded that, due to an increase in cutting speed, the average edge chipping rate will decrease until reaching a borderline speed. In the case of a higher cutting speed, the referent tendency cannot be ascertained. A statistical analysis conducted in the scope of this research showed that if a variable cutting speed is applied, then changes in the quality of the sample surface edge can be inferred from the development trends of average surface roughness.
1 May 2018 in Tehnicki vjesnik - Technical Gazette
Natural stones are common and preferred materials in the construction industry and in manufacturing technology, too. In every field of their application, it is outstandingly important that chipping caused by machining be minimised on the...
1 January 2024 in Processing and Application of Ceramics
A novel approach to investigate the oxidation behaviour of bilayer TiN/TiC coatings deposited on WC-Co substrate by CVD method was employed. Two coatings with different structures and mechanical properties were manufactured using different processing parameters. Energy dispersive X-ray analysis was utilized to monitor the elemental composition during oxidation tests at 800 ?C for up to 40min, which simulated the high temperature conditions experienced by the coated cutting tools. The obtained results demonstrated that the oxygen content increased significantly, reached ~68.8 at.%, while carbon and nitrogen contents decreased due to the formation of gaseous by-products. X-ray diffraction confirmed complete transformation of the TiN layer into rutile-TiO2 after 20min of oxidation. The microhardness of the coated samples significantly decreased due to the oxide formation and development of pores and cracks during the oxidation process. Tribological tests revealed a significant increase in the volume loss during dry sliding against zirconia counterpart after 20min of oxidation time. Moreover, surface colour of the oxidized coated samples changed from silver-white to grey-black with oxidation progression, enabling visual evaluation of oxidation damage.
On the manufacturing of different CNC machine-tools, the tables of ultraprecision machine-tools and CNC coordinate measuring machines are made of granite. Despite of the continuous industrial investigations, an accurate estimation system has not been developed so far. Although, an estimation program is necessary to predict the rate of the average edge chipping of different granite types. In this article, a summary of a research work is given connecting to this topic. Furthermore, the trendency of our future research is defined.