1 November 2018 in Solar Energy Materials and Solar Cells
12 July 2019 in npj Materials Degradation
The durability of solar mirrors is a critical factor for the deployment of concentrating solar power plants. Accelerated aging test models currently applied in the polymer, electronic, and photovoltaic fields have recently been reviewed, and the issues of their application to solar mirrors have been discussed. This article first reports the results of temperature, humidity, and light irradiance accelerated aging tests performed to assess the dependent parameters of selected models from the literature. These parameters include the apparent activation energy for the Arrhenius temperature law, the Peck and Eyring coefficients for humidity models and the Schwarzschild coefficient for the irradiance law. The experimental values were then assessed for specular reflectance loss of solar mirrors. Finally, using these parameters, acceleration factors were calculated for solar mirrors. An effective temperature considering the Arrhenius degradation law was used rather than the commonly used mean temperature. This question is also addressed for light irradiance by using the dose instead of the mean value.
1 January 2017 in AIP Conference Proceedings
This study aimed to compare three accelerated aging chambers with different lamps and irradiance levels: Suntest XXL+ and Sepap 12/24 from ATLAS MTS and UV5X from AMC/AMTC. Five kinds of solar mirrors were tested: thin and thick monolithic glass, laminated glass, aluminum and a glass mirror stick on a composite polymer substrate. All samples were aged under irradiation with a temperature set onto 70 °C. Temperatures were measured directly onto samples in addition to the chamber value. Temperature was kept constant and equal in each device in order to get the same acceleration factor due to temperature for all aging. This allowed comparing the effect of irradiation only. Specular reflectance was measured at several intervals during aging, and silver and paints surfaces were monitored by optical microscopy. This study is included in the framework of the STAGE-STE European project. One of the objectives is to establish a standard for CSP mirrors accelerated aging tests. Results of aging are needed to understand which tests are relevant to each available technology of mirror. Furthermore, a standard aimed to be applied in any device which can reach required conditions, so influence of these devices has to be known to ensure the reproducibility of aging between chambers and laboratories.