15 January 2018 in Applied Physics Letters
In this study, a NiO/diamond UV-photodetector has been fabricated and investigated. A single crystal diamond (SCD) layer was grown on a high-pressure-high-temperature Ib-type diamond substrate by using a microwave plasma chemical vapor deposition system. NiO films were deposited directly by the reactive magnetron sputtering technique in a mixture gas of oxygen and argon onto the SCD layer. Gold films were patterned on NiO films as electrodes to form the metal-semiconductor-metal UV-photodetector which shows good repeatability and a 2 orders of magnitude UV/visible rejection ratio. Also, the NiO/diamond photodetector has a higher responsivity and a wider response range in contrast to a diamond photodetector.
18 March 2019 in Scientific Reports
Fabrication of single crystal diamond capacitive pressure sensor is presented. Firstly, the single crystal diamond cantilever beam was formed on HPHT diamond substrate by using selective high-energy ion implantation, metal patterning, ICP etching and electrochemical etching techniques. Secondly, on this diamond cantilever beam, the desired electrode patterns were processed with photolithography and metal evaporation methods. Furthermore, the displacements of cantilever beam under different pressure conditions were investigated by atomic force microscopy. The capacitance-voltage curves of single crystal diamond cantilever beam and substrate under different force loading conditions were measured by using Agilent B1505A parameter analyzer. The results show that sensitivity increases with the enlargement of electrode area of cantilever beam, and decreases with the rise of measurement frequency.
1 November 2017 in Diamond and Related Materials
26 February 2018 in Applied Physics Letters
In this study, diamond pseudo-vertical architecture Schottky barrier diodes (PVSBDs) through the patterning tungsten growth method have been investigated. The forward current density is 16 A/cm2 at 5 V, and a rectification ratio is more than 5 orders of magnitude at ±5 V for diamond PVSBD. The reverse breakdown voltage is 640 V, and the corresponding electrical field is 4.57 MV/cm. These results are obtained by patterning tungsten (W) on the diamond surface as a blocking layer and growing a diamond epitaxial layer on the uncovered zone. A W/diamond ohmic contact was formed during the diamond epitaxial layer growth process. An aluminum film was used as a Schottky contact. Overall, the results illustrate that W patterned growth to fabricate PVSBD is efficient.
30 August 2021 in Applied Physics Letters
The heteroepitaxy of a single crystal diamond has been carried out in the KTaO3 substrate using Ir as a buffer layer. KTaO3 has a perovskite lattice structure and displays a face-centered cubic structure. Its lattice constant is 3.98 Å, which is only 3% mismatched with the lattice constant of Ir of 3.84 Å, and also, its thermal expansion coefficient is 4.031 × 10−6/K, which is nearly close to that of diamond 3.85 × 10−6/K (at 1223 K), making it to be regarded as an alternate substrate of the heteroepitaxy of a single crystal diamond. The magnetron sputtering technique was used to deposit Ir thin films with a high orientation in the (001) direction on a KTaO3 (001) substrate. Thereafter, bias enhanced nucleation on Ir surface was grown by direct current chemical vapor deposition (CVD) methods. At last, a single crystal diamond with a size of 10 × 10 × 0.78 mm3 has been grown, whose (004) rocking curve FWHM is 183 arc sec, which testifies to the excellent crystalline quality of the heteroepitaxial diamond film.
15 November 2021 in Optics Express
We investigate the photoemission process of the hydrogen atom in a spatial-dependent infrared (IR) field. The results show that the inhomogeneous field induces an additional contribution to the photoemission time delay, which results in the increase (decrease) of the photoemission time delay due to the enhancement (decay) of the IR field intensity in space when compared to the case in the homogeneous field. Based on the photoemission time delay in the inhomogeneous field, we demonstrate a method to extract the inhomogeneous parameter that is vital for characterizing the spatial distribution of IR field. The proposed method might pave an accessible route toward describing the plasmon-enhanced fields in the vicinity of a nanostructure.