Increasing percentages of Distributed Generators (DGs) in active distribution networks (ADNs) have increased the concern on excess generations in the medium and low voltage levels. High capacities of excess power are mainly from intermittent wind, solar power, and restricted power generations of combined heat and power (CHP) plants, which are determined by the heat demand. Turning excess power to hydrogen (P2H) has been recognized as a promising method to meet potential hydrogen demand from the traffic sectors. Nevertheless, it suffers from a low power-to-hydrogen efficiency, which is usually below 70% for commercialized electrolysis. By introducing in the heat recovery at the system level, we propose an integrated solution to supply heat to district heating networks (DHNs) while producing hydrogen, i.e., a power-to-hydrogen-and-heat scheme (P2HH). The extra benefit of P2HH resulting from heat supply is the reduction in the output of CHP, which reduces the excess energy in ADNs. This paper establishes a detailed "T-H-H" model to couple the power-to-heat and power-to-hydrogen processes. Then, a simplified P2HH dispatch model is proposed for the electricity-heat-hydrogen dispatch coordinated with ADN and DHN. Finally, the overall benefits of P2HH via improving the system economy and security are demonstrated with a modified IEEE 33-node system.
3 October 2019 in IEEE Transactions on Sustainable Energy
This paper studies siting and sizing of plug-in electric vehicle (PEV) fast-charging stations on coupled transportation and power networks. We develop a closed-form service rate model of PEV fast-charging stations' service abilities, which considers heterogeneous PEV driving ranges and charging demands. We utilize a modified capacitated flow refueling location model based on sub-paths (CFRLM SP) to explicitly capture timevarying PEV charging demands on the transportation network under driving range constraints. We explore extra constraints of the CFRLM SP to enhance model accuracy and computational efficiency. We then propose a stochastic mixed-integer second order cone programming (SOCP) model for PEV fast-charging station planning. The model considers the transportation network constraints of CFRLM SP and the power network constraints with AC power flow. Numerical experiments are conducted to illustrate the effectiveness of the proposed method.
28 July 2022 in IEEE Transactions on Sustainable Energy
With the rapid growth of intermittent renewable energy sources, it is critical to ensure that renewable power generators have the capability to perform primary frequency response (PFR). This paper proposes a framework for using a shared battery energy storage system (BESS) to undertake the PFR obligations for multiple wind and photovoltaic (PV) power plants and provide commercial automatic generation control (AGC) service in the ancillary service market at the same time. Furthermore, an optimal bidding strategy in the hour-ahead energy and ancillary service markets is proposed to maximize the BESS' benefits, considering frequency regulation performance, battery degradation cost, and the state of charge (SoC) limits. The optimization model is first built as a chance-constrained optimization problem and then transformed into mixed-integer quadratically constrained programming using Wasserstein metric-based distributionally robust optimization technique. Simulation results show that the proposed optimal bidding strategy and solution method can effectively take advantage of a BESS to perform PFR and provide AGC services simultaneously and improve its economic benefits.
4 May 2018 in IEEE Transactions on Sustainable Energy
Short-term probabilistic wind power forecasting can provide critical quantified uncertainty information of wind generation for power system operation and control. It would be difficult to develop a universal forecasting model dominating over other alternative models because of the inherent stochastic nature of wind power. Therefore, a novel multi-model combination (MMC) approach for short-term probabilistic wind generation forecasting is proposed in this paper to exploit the advantages of different forecasting models. The proposed approach can combine different forecasting models those provide different kinds of probability density functions to improve the probabilistic forecast accuracy. Three probabilistic forecasting models based on the sparse Bayesian learning, kernel density estimation and beta distribution fitting are used to form the combined model. The parameters of the MMC model are solved by two-step optimization. Numerical tests illustrate the effectiveness of the proposed MMC approach.