10 January 2019 in IEEE Access
In the Chang'E-5 mission of the lunar regolith drilling, the gap between the rotary drill bit and the sheath is required to be sealed. In view of the particularity of the lunar subsurface operation, a spiral seal method is proposed based on the analysis of the particles flow state in the clearance, which is made up of the spiral ribs on the inner surface of the drill bit and the friction interface on the outer surface of the sheath. The drilling and sampling simulation is carried out using discrete element method, which verifies the feasibility of the spiral seal in principle. For the test of sealing performance, a test system was developed and drilling and sampling experiments were carried out with several groups of sealing components that have different structure parameters. The test results show that the proposed spiral seal method solves the problem of regolith leakage well in the drilling and sampling process, and it will contribute to the design of the Chang'E-5 drill.
1 March 2019 in IEEE Access
Planetary regolith conveying is an important process during planetary in situ resource utilization. After introducing finlike asperities on a longitudinally vibrated trough surface, we experimentally investigated the effects of vibration amplitude, frequency, and trough inclination angle on the particle flow state and directional conveying capacity. A numerical simulation based on the discrete element method (DEM) was then employed to study the detailed particle motion. Three flow states gradually appeared as the vibration strength increased: the particles remain stationary, flow down to the bottom of the trough, or directionally convey toward the discharge hole. The results indicated that the directional conveying capacity increased and decreased monotonically with increases in the vibration amplitude and trough inclination angle, respectively. The conveying capacity changed circuitously as the frequency increased and vanished when the frequency approached the resonant frequency of the trough. Additionally, according to the DEM simulation, breaking the force chains in the particle pile is necessary for conveying. The asymmetric force induced by the finlike asperities and its cumulative effect over time determines the particle flow state and conveying capacity. The particle flow velocity decreased as the granular layer height increased. This paper provides inspiration and guidance for designing a new type of conveyor for planetary regolith.
1 January 2018 in Shock and Vibration
Particles can move directionally in a trough with finlike asperities under longitudinal vibrations. Here, we present an analysis of the particle conveyance mechanism and the influence of the asperity shape on the particle conveyance capacity by employing a numerical simulation based on the discrete element method (DEM). A dynamic‐static matching method is proposed to characterize the three microcontact parameters in the simulation: the restitution coefficient, static friction coefficient, and rolling friction coefficient. The simulation shows that the asymmetric force induced by the finlike asperities and its cumulative effect over time lead to the particle directional conveyance. The conveyance velocity increases with increasing vibration time and is related to the median coordination number. The asperity height and slope inclination angles determine the trough shape and distance between two asperities directly. An undersized or oversized distance reduces the steady conveyance velocity. We find the optimal distance to be between one and two particle diameters.
1 July 2021 in Advances In Space Research