Jiayu Zhang

Jiayu Zhang

Auto-generated profile, based on publicly available information

Jiayu Zhang

State Key Laboratory of Radio Frequency Heterogeneous Integration, Shanghai Jiao Tong University, Shanghai, China

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 April 2024 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
ZZZhiwei Zhang
Zhiwei Zhang
JZJiayu Zhang
Jiayu Zhang
JLJingtao Liu
Jingtao Liu
YLYuchen Li
Yuchen Li
CGChangzhan Gu
Changzhan Gu
The motion sensing capability of millimeter-wave radar is significantly contingent upon its operating frequency. However, conventional techniques do not allow frequency modification once the radar hardware is completed. In this article, a novel frequency-reconfigurable technique is proposed to enable the operating frequency reconfiguration without any hardware modifications, enhancing the radar’s capability to perceive displacement motions across various scales. This technique splits frequency-modulated continuous-wave (FMCW) beat signals into multiple sub-FMCW signals, yielding pairs of quadrature signals that are similar to those in continuous-wave radars. These quadrature signals are subsequently synthesized to quadrature signals at a new operating frequency. For weak motions of deep subwavelength scale, the proposed technique improves the detection sensitivity by reconstructing equivalent quadrature signals at a higher operating frequency, such as from 60 up to 480 GHz. For large-scale motions, this technique surpasses the radar’s velocity limit by reconstructing that at a lower frequency, e.g., 60–1 GHz. Simulation results and theoretical analysis demonstrate the superiority of this technique for motion sensing. Experiments were also carried out to validate this technique in detecting the weak deep subwavelength, large-scale mechanical vibrations, and action gestures. Experimental results indicate that this technique exhibits approximately a three times accuracy improvement in detecting weak motions and about ten times accuracy improvement in detecting large-scale motions compared to the conventional technique.

21 February 2024 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
JZJiayu Zhang
Jiayu Zhang
ZZZhiwei Zhang
Zhiwei Zhang
YLYuchen Li
Yuchen Li
CGChangzhan Gu
Changzhan Gu
JMJunfa Mao
Junfa Mao
Frequency-modulated continuous-wave (FMCW) radar is commonly employed for target detection. Nevertheless, leakage often occurs between the transmitter (Tx) and the receiver (Rx), leading to degrade the detection of targets in short range. It happens because the Tx–Rx leakage introduces a time delay that is comparable with that of the backscattered reflections from the target, which worsens the signal-to-noise ratio (SNR) and the signal-to-interference ratio (SIR). This article proposes a novel and versatile time–frequency characteristic-based leakage cancellation technique (TFCBLC). By cleverly exploiting the frequency-domain features of the intermediate frequency (IF) signal, the leakage is mitigated through the IF compensation with an antileakage signal. Moreover, the multichirps convolution technique (MCCT) based on the equivalent FMCW radar has been developed to address the problems associated with challenging detection caused by residual leakage and inherent noise. The proposed technique effectively suppresses the Tx–Rx leakage and attenuates noise, enhancing the system’s ability for short-range target detection. A series of simulations and experiments were conducted to demonstrate the effectiveness of the proposed technique for short-range detection with strong leakage and significant noise environments. The results indicate that the SIR and SNR have been improved by around 30 and 17 dB, respectively.

7 October 2025 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
JZJiayu Zhang
Jiayu Zhang
YLYuchen Li
Yuchen Li
YCYiyan Cao
Yiyan Cao
ZZZhiwei Zhang
Zhiwei Zhang
CGChangzhan Gu
Changzhan Gu
JMJunfa Mao
Junfa Mao
Accurate contactless microwave cardiogram (MCG) sensing, which is essential for providing health information, remains a significant challenge in multitarget scenarios. In particular, existing multiple-input–multiple-output (MIMO) frequency-modulated continuous-wave (FMCW) radars struggle to effectively suppress respiratory interference, which impacts the detection of subtle heart motions. Moreover, traditional systems are constrained by spatial resolution, thereby limiting the ability to resolve multitarget, and further degrading MCG extraction performance. To address these challenges, a novel 4-D digital beamforming (DBF) technique is proposed, in which 3-D chest positions of multiple targets, including range, azimuth, and elevation, are localized by the radar with precise beam steering, after which the corresponding micro-Doppler motions are extracted. A newly introduced motion-frequency-domain beamforming (MFDDBF) technique is then employed to achieve 1-D MCG sensing and respiratory interference suppression, enabling linear, efficient, and distortion-free time-domain waveforms extraction of both the fundamental and harmonic components of the respiratory. By removing the respiratory from the chest micromotions, clean MCG signals are obtained. Furthermore, a $K$ -band short-range end-to-end 4T8R sparse MIMO FMCW radar system is designed and implemented, achieving a spatial resolution of 6° in azimuth and 8° in elevation, while providing a 90° field of view (FOV) in both dimensions and maintaining a −6-dB sidelobe level (SLL), which enables effective multitarget separation and significantly enhances the accuracy of MCG sensing. Experiments were conducted to validate the system. The results demonstrate that the system achieves an accurate multitarget MCG sensing and a root-mean-squared error (RMSE) of 10 ms for RR interval, highlighting its potential for radar-based vital sign monitoring applications.

15 May 2025 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
JZJiayu Zhang
Jiayu Zhang
ZZZhiwei Zhang
Zhiwei Zhang
YLYuchen Li
Yuchen Li
CGChangzhan Gu
Changzhan Gu
JMJunfa Mao
Junfa Mao
Multiple-input-multiple-output (MIMO) frequency-modulated continuous-wave (FMCW) radar systems often encounter performance degradation in short-range applications. In particular, short-range leakages and stationary clutters can introduce interferences that obscure the detection of targets of interest, while traditional systems are limited by inadequate spatial resolution, which constrains their ability to acquire accurate point cloud data. To address these challenges, a K-band short-range end-to-end 2T4R sparse MIMO FMCW system was proposed and designed, achieving a threefold enhancement in point cloud acquisition capability. Based on this system, a 3-dB beamwidth of 8.97° and a measured angular resolution of 13.8° are achieved, corresponding to improvements of 29.8% and 32.8%, respectively, compared to the conventional uniform array, while a sidelobe level of −10 dB and a wide field of view of 100° are also demonstrated. Furthermore, a novel frequency-domain interferences (leakages and stationary clutters) cancellation technique (FDICT) has been introduced to eliminate interferences, significantly enhancing the system’s short-range detection performance. By exploiting the frequency-domain characteristics of the intermediate frequency (IF) signals, this technique effectively mitigates interferences, offering robust and versatile cancellation of multipath leakages and stationary clutters for both synchronous and asynchronous systems, thus enabling accurate point cloud acquisition. Simulations and experiments were conducted to validate the system. The results demonstrate that the radar achieved the expected performance, and the proposed technique effectively eliminates leakages and stationary clutters, leading to an average improvement of 15 dB in signal-to-interference ratio (SIR) across the entire spectral range. Compared to traditional systems, the proposed system demonstrates superior short-range sensing performance, making it particularly advantageous for short-range applications.

16 April 2025 in IEEE Microwave and Wireless Technology Letters
Verified
Journal Article
Closed access
JZJiayu Zhang
Jiayu Zhang
YLYuchen Li
Yuchen Li
ZZZhiwei Zhang
Zhiwei Zhang
CGChangzhan Gu
Changzhan Gu
JMJunfa Mao
Junfa Mao
High-resolution multiple-input multiple-output (MIMO) radar has been extensively employed for imaging across a wide range of applications. However, when radar systems are designed with a wide modulation bandwidth and a large aperture, performance degradation caused by range-angle coupling (RAC) becomes a significant challenge. Such coupling severely reduces angular resolution at off-boresight angles when conventional digital beamforming is utilized. To address this issue, a novel frequency-spatial adaptive digital beamforming (FSADBF) technique is proposed, in which adaptive steering vectors are generated based on frequency-spatial phase of the intermediate frequency (IF) signals for accurate angle estimation. Through this approach, target range estimation is performed within each angular cell, thereby avoiding the degradation of resolution caused by RAC, where the target is distributed across a large number of angle cells, particularly at off-boresight angles. Simulations and experiments have been conducted to validate the proposed technique, which significantly improves the angular resolution of MIMO radar.

15 April 2025 in IEEE Sensors Journal
Verified
Journal Article
Closed access
JZJiayu Zhang
Jiayu Zhang
ZZZhiwei Zhang
Zhiwei Zhang
YLYuchen Li
Yuchen Li
CGChangzhan Gu
Changzhan Gu
JMJunfa Mao
Junfa Mao
Frequency-modulated continuous-wave (FMCW) radar has been widely utilized for target detection and motion sensing. However, conventional techniques are constrained by radar bandwidth, spectral leakage, and noise, making the separation and accurate detection of multiple targets within range resolution a significant challenge. To address these limitations, a reconfigurable frequency-spatial equivalent array (RFSEA) technique is proposed. A frequency-domain virtual array is constructed by exploiting the characteristics of spatial array, effectively improving the signal-to-noise ratio (SNR), enhancing the performance of the subspace algorithm, and significantly substantially increasing range resolution to achieve more accurate close-spaced multi-targets separation. In addition, the introduction of frequency-domain adaptive digital beamforming (FDADBF) technology minimizes mutual interference caused by spectral leakage, facilitating highly accurate motion measurement. Simulation and experimental results demonstrate that the proposed technique improves range resolution by 42.8%, achieves motion measurement within range resolution with average root-mean-square errors (RMSEs) below 10%, and delivers a threefold improvement in accuracy compared to conventional methods. These findings underscore the potential of RFSEA in advancing high-resolution and precise motion sensing applications.