7 February 2022 in Applied Physics Letters
Benefitting from regrown Ohmic contact with a contact ledge structure, high performance millimeter-wave InAlN/GaN HEMT is fabricated to satisfy low voltage RF applications. Different from the commonly seen fabrication process for regrown Ohmic contact, the scheme proposed in this work features MBE regrowth of n+ GaN on the whole wafer after formation of regrowth well without masks and partial removal of n+ GaN grown on the access region by self-stopping etching. The remaining n+ GaN on the barrier, serving as contact ledges, provides an additional current path to achieve the reduced equivalent source-drain distance and, thus, improved output current, and more current contribution is made by contact ledge as the actual source-drain distance shrinks. With the assistance of contact ledge, the fabricated device demonstrates output current density of 2.8 A/mm, a peak extrinsic transconductance of 823 mS/mm, a knee voltage of 1.6 V, and an on-resistance of 0.47 Ω·mm. Although self-stopping etching is performed on the access region, the device exhibits ignorable current collapse. At 30 GHz and VDS of 6 V, decent power-added-efficiency of 52% together with output power density of 1.2 W/mm is achieved, revealing the great potential of the proposed regrown Ohmic contact with contact ledge structure for low voltage RF applications.
9 December 2022 in IEEE Transactions on Electron Devices
In this work, high-efficiency InAlN/GaN high electron mobility transistor (HEMT) is fabricated by recess and oxidation process under the gate (RAO) for low-voltage RF applications. Compared with conventional HEMT fabricated on the same heterojunction, RAO-HEMT exhibits a significant decrease in gate leakage, attributed to the thin oxide layer formed around and under the gate as well as adjustment of the location of the peak electric field and confinement of the strong electric field in the oxide. Due to the alleviated electric field as well as adoption of N $_{\text{2}}$ O for plasma treatment, suppressed RF dispersion including the extremely low current collapse and negligible knee voltage walkout is obtained for RAO-HEMT. Although RAO-HEMT delivers lower saturation current as the result of the partial oxidation of the barrier under the gate, it shows a similar ON-resistance to conventional HEMT, which contributes to the reduction in knee voltage. Besides, higher $\textit{f}_{\textit{T}}$ / $\textit{f}_{\text{MAX}}$ is achieved for RAO-HEMT, as the result of the higher dc transconductance and suppressed RF transconductance collapse as well as larger output resistance. Eventually, benefiting from the improvement in gate leakage, RF dispersion, knee voltage, and $\textit{f}_{\text{MAX}}$ by RAO, RAO-HEMT delivers both higher power-added-efficiency (PAE) and output power ( $\textit{P}_{\text{OUT}}$ ) than conventional HEMT. At 3.6 GHz, RAO-HEMT provides a high PAE of 71% (74%) at $\textit{V}_{\text{\text{DS}}}$ of 6 V (9 V), which performs better than most of the existing Si, GaAs, or GaN RF devices in PAE, revealing the great potential of InAlN/GaN RAO-HEMT in low-voltage low-power consumption RF applications.
7 March 2022 in Applied Physics Letters
In this work, ultrathin barrier (∼6 nm) AlGaN/GaN high-electron-mobility transistors (HEMTs) with in situ SiN gate dielectric and slant-field plate (SFP) T-gates were fabricated and analyzed. Since the proposed scheme of gate dielectric and SFP effectively suppresses the gate leakage and alleviates the peak electric field (E-field) around gate region, the maximum breakdown voltage (VBK) was improved to 92 V, which is 54 V higher than that of the conventional device. The fabricated ultrathin AlGaN/GaN HEMT with 60-nm SFP-T-gate exhibited the peak fT of 177 GHz and peak fmax of 393 GHz, yielding high figure-of-merits of fT · VBK = 16 THz V and fmax·VBK = 36 THz V. Moreover, load-pull measurements at 30 GHz reveal that these devices deliver output power density (Pout) of 4.6 W/mm at Vds = 20 V and high power-added efficiency up to 52.5% at Vds = 10 V. Essentially, the experimental results indicate that the employment of SFP and in situ SiN gate dielectric is an attractive approach to balance the breakdown and speed for millimeter wave devices.
23 May 2023 in IEEE Transactions on Electron Devices
In this work, high-efficiency millimeter-wave enhancement-mode (E-mode) Fin-high electron mobility transistor (HEMT) is fabricated to satisfy low-voltage terminal applications, whose fabrication process is performed on the in situ SiN passivated ultrathin-barrier AlGaN/GaN heterojunction and features N $_{\text{2}}$ O plasma oxidation treatment on the fins. Specifically, the fabricated E-mode Fin-HEMT exhibits a positive threshold voltage of 0.3 V, at the cost of decreased maximum output current density of 483 mA/mm and lowered peak extrinsic transconductance of 277 mS/mm. Comfortingly, a reduced knee voltage of 1.5 V together with suppressed OFF-state leakage current of 6 $\times$ 10 $^{-\text{6}}$ mA/mm is also obtained for Fin-HEMT. Besides, an OFF-state breakdown voltage of 38 V is achieved, which is sufficiently high to meet the low-voltage RF device’s need for breakdown voltage. Pulsed $\textit{I}$ – $\textit{V}$ measurement shows that a negligible current collapse (CC) is achieved for Fin-HEMT. Additionally, Fin-HEMT demonstrates a good stability by stress reliability test. Subsequently, the $\textit{f}_{\textit{T}}$ / $\textit{f}_{\text{MAX}}$ value of 40/86 GHz is obtained for Fin-HEMT at $\textit{V}_{\text{DS}}$ of 6 V by small signal measurement. Eventually, the millimeter-wave low-voltage load pull measurement shows that the fabricated E-mode Fin-HEMT is able to deliver a decent power added efficiency (PAE) of 55% at 30 GHz and $\textit{V}_{\text{DS}}$ of 6 V, revealing the great potential of the fin configuration combined with ultrathin-barrier AlGaN/GaN heterojunction passivated by in situ SiN and N $_{\text{2}}$ O plasma oxidation treatment in high-efficiency millimeter-wave low-voltage terminal applications.
6 January 2023 in IEEE Journal of the Electron Devices Society
In this work, high performance InAlN/GaN HEMT based on the n+GaN regrown ohmic contact with n+GaN contact ledge structure is proposed. The regrown ohmic contact of InAlN/GaN HEMT is formed by MBE n+GaN regrowth and selfstopping etching, which makes the total ohmic contact resistance between the 2DEG channel and the ohmic metal decrease to 0.12 Ωmm and forms n+GaN contact ledge structure. Owing to the n+GaN contact ledge on the InAlN barrier, with the increasing of drain-source voltage (VDS), an additional current path comes into being between the n+GaN contact ledge on the InAlN barrier and the 2DEG channel, which can “shorten” the device effective drainsource distance, thus further reducing the parasitic resistance. Compared with regrown InAlN/GaN HEMT without n+GaN contact ledge structure, the peak transconductance (Gm.max) of regrown InAlN/GaN HEMT with n+GaN contact ledge structure increases from 747 mS/mm to 874 mS/mm, and the saturation current density (ID.max) increases from 2.6 A/mm to 2.9 A/mm. Besides, the self-stopping etching on the access region does not induce extra defects, and negligible current collapse is obtained. As the results of low parasitic resistance, high output current density, low knee voltage and negligible current collapse, poweradded-efficiency (PAE) of 44% together with output power density (Pout) of 2.5 W/mm is achieved at 30 GHz and VDS of 10 V, which indicates regrown InAlN/GaN HEMT with n+GaN contact ledge structure has great potential for millimeter-wave low voltage applications. Additionally, the transfer and schottky gate characteristics show negligible degradation after OFF/ON-state electrical stress tests.
26 February 2024 in IEEE Transactions on Electron Devices
In this work, using the multiple threshold voltages (multi- $\textit{V}_{\text{Ths}}\text{)}$ coupling technology introduces an innovative approach to leverage AlGaN/GaN-based high-electron-mobility transistor (AlGaN/GaN HEMT) for high linearity millimeter-wave (mm-W) applications. As a result of optimizing the etching depth of the recessed trench ( $\textit{H}_\textit{R}$ ), the fabricated composite HEMT demonstrated a remarkably flat transconductance ( $\textit{G}_\textit{m}$ ) plateau, and well-maintained profile of small-signal characteristics as a function of gate voltage. As a consequence, at a biased drain voltage of 10 V and a frequency of 30 GHz, the composite HEMT achieved the highest ratio of output third-order intercept point (OIP3) to DC power consumption ( $\textit{P}_{\text{DC}}\text{)}$ , denoted as (OIP3/ $\textit{P}_{\text{DC}}\text{)}$ , measuring $\sim$ 9.3 dB. Simultaneously optimizing the bias conditions, the devices showcased a remarkable combination of high one-tone saturated output power density reaching 6.5 W/mm and two-tone OIP3/ $\textit{P}_{\text{DC}}$ of $\sim$ 6.1 dB, achieved at a biased drain voltage of 25 V. The experimental results provide compelling evidence of the attractiveness of the multi- $\textit{V}_{\text{Ths}}$ coupling technique for millimeter wave RF transmitters.