30 March 2015 in Proceedings of the National Academy of Sciences
JCJosé Rafael Castrejón-Pita
José Rafael Castrejón-Pita
+2
Significance: Fluid flows, governed by nonlinear equations, permit formation of singularities. Often, singularities are artifacts of neglecting physical effects. However, free-surface flows exhibit observable singularities including filament pinch-off. As filaments thin, slightly (highly) viscous filaments are expected from theory to transition from an inertial (viscous) regime where viscosity (density) is negligible to an inertial–viscous regime where viscous and inertial effects are important. Previous works show this transition either does not occur or occurs for filament radii well below theoretical predictions. We demonstrate that thinning filaments unexpectedly pass through a number of intermediate transient regimes, thereby delaying onset of the final regime. The findings raise the question if similar dynamical transitions arise in problems that are not necessarily hydrodynamic in nature.
17 February 2012 in Physical Review Letters
Whether a thin filament of liquid separates into two or more droplets or eventually condenses lengthwise to form a single larger drop depends on the liquid's density, viscosity, and surface tension and on the initial dimensions of the filament. Surface tension drives two competing processes, pinching-off and shortening, and the relative time scales of these, controlled by the balance between capillary and viscous forces, determine the final outcome. Here we provide experimental evidence for the conditions under which a liquid filament will break up into drops, in terms of a wide range of two dimensionless quantities: the aspect ratio of the filament and the Ohnesorge number. Filaments which do not break up into multiple droplets demand a high liquid viscosity or a small aspect ratio.
26 October 2016 in Physical Review Letters
JCJ. Rafael Castrejón-Pita
+1
Droplets splash when they impact dry, flat substrates above a critical velocity that depends on parameters such as droplet size, viscosity, and air pressure. By imaging ethanol drops impacting silicone gels of different stiffnesses, we show that substrate stiffness also affects the splashing threshold. Splashing is reduced or even eliminated: droplets on the softest substrates need over 70% more kinetic energy to splash than they do on rigid substrates. We show that this is due to energy losses caused by deformations of soft substrates during the first few microseconds of impact. We find that solids with Young’s moduli reduce splashing, in agreement with simple scaling arguments. Thus, materials like soft gels and elastomers can be used as simple coatings for effective splash prevention. Soft substrates also serve as a useful system for testing splash-formation theories and sheet-ejection mechanisms, as they allow the characteristics of ejection sheets to be controlled independently of the bulk impact dynamics of droplets.
15 February 2018 in Advanced Functional Materials
11 December 2021 in Advanced Optical Materials
Conventional polymer dispersed liquid crystal (PDLC) films have been successful as electrically‐switchable screens for privacy applications. However, spatial patterning of the films so as to generate a visually appealing design, logo, or image typically requires intricate fabrication processes, such as the use of prefabricated photomasks that do not allow for on‐demand designs. Herein is reported on the fabrication and characterization of spatially patterned PDLC “pixels” using drop‐on‐demand inkjet printing, and it is demonstrated how these materials can be used to form a new generation of smart windows that consist of embedded images or company logos, which can be made to disappear with the application of a voltage. Following refinements to the material rheology and the subsequent successful deposition of individual PDLC droplets, arrays of PDLC pixels are printed at a resolution of 250 pixels per inch with an individual pixel size of 130 µm operating at an electric field strength (E) of E = 1.4 V μm−1. Finally, using the approach developed herein, these printed PDLC pixels are arranged to form a college emblem that is embedded within a smart window that can be made to disappear with the application of a voltage.
26 August 2013 in Physical Review E
The coalescence and mixing of a sessile and an impacting liquid droplet on a solid surface are studied experimentally and numerically in terms of lateral separation and droplet speed. Two droplet generators are used to produce differently colored droplets. Two high-speed imaging systems are used to investigate the impact and coalescence of the droplets in color from a side view with a simultaneous gray-scale view from below. Millimeter-sized droplets were used with dynamical conditions, based on the Reynolds and Weber numbers, relevant to microfluidics and commercial inkjet printing. Experimental measurements of advancing and receding static contact angles are used to calibrate a contact angle hysteresis model within a lattice Boltzmann framework, which is shown to capture the observed dynamics qualitatively and the final droplet configuration quantitatively. Our results show that no detectable mixing occurs during impact and coalescence of similar-sized droplets, but when the sessile droplet is sufficiently larger than the impacting droplet vortex ring generation can be observed. Finally we show how a gradient of wettability on the substrate can potentially enhance mixing.