In this paper we demonstrate a fully integrated 300 V low current charge pump design which has been manufactured using Teledyne DALSA's triple well 800 nm high voltage IC process. This charge pump is powered by a 5 V supply, drawing less than 2% of the USB 2.0 maximum current, thus enabling future low-cost compact point-of-care diagnostic devices that would be connected to and powered off a laptop or smart phone. We have demonstrated this device to be capable of producing 300 V while sourcing up to 10 μA.
Lab-on-chip technology has tremendous potential for point-of-care and in-field medical diagnostics, but the uptake of such technologies is hampered by the high cost and large size of the instrumentation conventionally required. In the present work we demonstrate an instrument that fully automates sample preparation, enzymatic digestion and electrophoresis to implement DNA sizing and restriction fragment length polymorphism analysis for mutation detection. The instrument is largely based on a single CMOS chip, notably for fluorescence detection and high voltage generation, and can be operated in an off-the-shelf mode using low-cost pre-packaged polymeric microfluidic chips. We demonstrate the automated detection of the C282Y single nucleotide mutation in the HFE gene that underlies hereditary haemochromatosis. The system is currently in a portable form factor and could be implemented in a hand-held format. In higher volumes of manufacture, the remainder of the instrument could be moved to the CMOS chip, enabling a single chip instrument that could be housed within an inexpensive, thumb-sized device.
We present a custom integrated circuit (IC) for use in miniaturized genetic test devices with optical coupling with either an optical relay lens or direct surface contact micro-fluidic channels. This IC is capable of high-voltage generation in the 70-300 V range at 10 μA. High-voltage switching circuits for mm-scale capillaries channels with up to 4 electrodes are present. Optical detection with an optical power resolution of 0.46 pW across the diode surface is available for sample detection through a 13-bit analog-to-digital converter. All systems and supporting devices communicate and are powered by a USB connection and fall within the USB 2.0 power budget of 2.5 W.