1 October 2017 in Journal of Colloid and Interface Science
1 March 2010 in Journal of Colloid and Interface Science
1 August 2010 in Journal of Colloid and Interface Science
1 August 2016 in Physical Review E
At a three-phase contact line, a liquid bulk phase is in contact with and coexists with a very thin layer of adsorbed molecules. This adsorbed film in the immediate vicinity of a liquid wedge modifies the balance of forces between the liquid and solid phases such that, when included in the balance of forces, a quantitative relationship emerges between the adsorbed film thickness and the static contact angle. This relationship permits the prediction of static contact angles from molecular forces and equilibrium adsorption data by means of quantities that are physically meaningful and measurable. For n-alkanes on polytetrafluoroethylene, for which there are experimental data available on adsorption and contact angles, our computations show remarkable agreement with the data. The results obtained are an improvement on previously published calculations—particularly for alkanes with a low number of carbon atoms, for which adsorption is significant.
1 October 2021 in Physics of Fluids
A theoretical model of a moving contact line was developed for a dewetting flow created by removing a flat solid from a liquid. The model introduces the effect of molecular forces in the near vicinity of the moving contact line. The laminar flow representation is based on a combination of streamline functions defined in a molecular domain where molecular forces are predominant and in a macroscopic domain where viscous forces are predominant. The solution realistically displays the details of the viscous flow near the contact line and compares accurately with existing experimental data. The combined molecular-macroscopic solution resolves the hydrodynamic paradox created by a purely viscous model of this flow [Huh, C. and Scriven, L.E., “Hydrodynamic model of the steady movement of a solid/liquid/fluid contact line,” J. Colloid Interface Sci. 35, 85–101 (1971)] shown to be at odds with experimental data [Fuentes, J. and Cerro, R. L. “Flow patterns and interfacial velocities near a moving contact line,” Experiments in Fluids 38(4), 503–510 (2005)].
25 October 2019 in Chemical Engineering Communications
The effect of an innovative sieve plate orifice layout on the hydrodynamics of a cylindrical bubble column is investigated. The classical triangular layout is compared with a novel spiraled layout, using the same number and diameter of orifices. The experiments include two different column aspect ratios and two liquid phases of different coalescing nature. According to the holdup data, if the spiraled layout is used, the flow regimes evolve from a pseudo-homogeneous regime to a heterogeneous regime going through a transition regime, as the superficial gas velocity increases. When the triangular layout is used, the homogeneous regime is not detected and pure heterogeneous regime is obtained at all superficial gas velocities. When using the spiraled layout, the gas retention increases, resulting 24% higher in the homogeneous regime and 13% higher in the heterogeneous regime with respect to the gas retention obtained with the triangular layout. If bubble coalescence is modified by the addition of NaCl, the holdup increases for both layouts, but to a lower extent in the spiraled layout (10%) compared to the triangular layout (24%). The reason behind the reduction of coalescence and higher gas holdup values is the ability of the spiraled layout to produce bubbles that do not interact with each other during a longer path along the column.