21 October 2010 in IET Microwaves, Antennas & Propagation
A new method for the characterisation of receiving mutual impedances of compact arrays with omni-directional antenna elements is proposed. Based on a large number of incident waves coming from different directions, the new method is able to calculate the receiving mutual impedances of omni-directional antennas based on a system of equations that characterise the received terminal voltages at different incident wave directions. In the new method, the receiving mutual impedances of all the antenna elements are calculated together in a single equation with the scattering effect from all antenna elements in the array being taken into account. Compared to the previous methods for the characterisation of the receiving mutual impedances, the new method preserves the boundary conditions of the original electromagnetic problem and produces much more accurate results on receiving mutual impedances, especially for compact antenna arrays. Direction finding examples based on the new method demonstrate its superior performance over existing methods.
2 March 2009 in IET Microwaves, Antennas & Propagation
The effect of antenna mutual coupling on signal correlation and bit error rate (BER) of a multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) system has been modelled. A MIMO-OFDM model with correlated channels is presented. The correlation matrices are determined with the antenna mutual coupling taken into account. The effect of antenna mutual coupling is characterised using the receiving and transmitting mutual impedances. A rigorous expression for the BER of the system employing quadrature phase-shift keying digital modulation is derived. A 2×2 MIMO-OFDM system using the Alamouti space–time block code for OFDM symbol transmission over 64 sub-channels spanning a 20 MHz band centred at 5.2 GHz is simulated. The simulated results show that the antenna mutual coupling has a significant effect on the BER performance, especially when the spacing between the antenna elements is small.
26 April 2011 in IET Microwaves, Antennas & Propagation
An effective method is suggested to compensate for the mutual coupling in the coupled array patterns of compact antenna arrays. By using the mutual impedances of the antenna elements, the authors showed that it is possible to design compensation networks that can remove the distortion on array patterns due to the mutual coupling effect. The compensated array patterns enable us to predict the radiation characteristics of compact antenna arrays using the principle of pattern multiplication based on their ideal and isolated element patterns. Equations for the construction of such compensation networks are obtained and the realisation method is discussed. With these compensation networks, further conventional port-decoupling and matching circuits can be designed and connected to their inputs to achieve maximum power transfer from the source to the antenna array. Numerical examples on dipole and monopole arrays demonstrate the validity and accuracy of the method.