16 November 2021 in IEEE Transactions on Electron Devices
In this work, we report high-performance amorphous indium gallium zinc oxide (a-IGZO) thin-film transistors (TFTs) with atomic layer deposited Al 2 O 3 dielectric processed at a minimal temperature of 189.6 °C via microwave annealing (MWA). The a-IGZO TFT with MWA exhibits an improvement of 57% in subthreshold swing (SS) compared with the unannealed device; meanwhile, it retains high field-effect mobility of up to 29.2 cm 2 /(V $\cdot $ s) and large switching ratio of >10 8 . Moreover, the SS of the device was further reduced through a two-step MWA treatment. It is believed that MWA treatment effectively reduces the density of trap states associated with oxygen vacancies, promotes the formation of lattice oxygen, and thus improves the quality of IGZO film. MWA with low thermal budget shows great potential in applications of the back-end of line (BEOL)-compatible oxide devices.
22 May 2023 in IEEE Electron Device Letters
In this letter, four ferroelectric (FE) capacitors with thickness dependent ZrO 2 seed layer (SL) were designed and fabricated at a low annealing temperature below 350 °C. By modulating the thickness of ZrO 2 SL, it is demonstrated that the FE capacitor with 1 nm ZrO 2 SL exhibits a superior remnant polarization (2 Pr ) of 44.1 μC/cm 2 under 3 MV/cm at 1 kHz and 2 Pr of 17.6 μC/cm 2 after 10 9 cycles at 3 MV/cm. It is found that the 1 nm ZrO 2 SL provides more growth sites for the Hf 0.5 Zr 0.5 O 2 (HZO) thin films, and enhances the ratio of the ferroelectric phases during crystallization, thereby leading to enhancement of its ferroelectricity and reliability. This work provides a robust solution to improve both ferroelectricity and endurance for future ferroelectric device compatible with back end of line (BEOL) process.