28 July 2020 in Biomass Conversion and Biorefinery
In many industrial processes, the climate-damaging gas CO2is produced as undesired by-product. The dual fluidized bed biomass gasification technology offers the opportunity to tackle this problem by using the produced CO2within the process as gasification agent. Therefore, a 100 kWthpilot plant at TU Wien was used to investigate the use of CO2as gasification agent by converting softwood as fuel and olivine as bed material into high-valuable product gas. A parameter variation was conducted, where the typically used gasification agent steam was substituted stepwise by CO2. Thereby, the amount of CO and CO2increased and the content of H2decreased in the product gas. These trends resulted in a declining H2/CO ratio and a decreasing lower heating value when CO2was increased as gasification agent. In contrast to these declining trends, the carbon utilization efficiency showed an increasing course. As second part of this work, a temperature variation from 740 to 840 °C was conducted to investigate the change of the main product gas components. With increasing temperature, CO and H2increased and CO2decreased. To determine the degree of conversion of CO2in the DFB reactor system, two approaches were selected: (1) a carbon balance and (2) a hydrogen balance. This way, it was found out that a certain amount of CO2was indeed converted at the investigated process conditions. Furthermore, under certain assumptions, the reverse water-gas shift reaction was identified to be the predominant reaction during CO2gasification.
26 February 2024 in Applied Energy
Dual fluidized bed (DFB) gasification is a promising method for producing valuable gaseous energy carriers from biogenic feedstocks as a substitute for fossil fuels. State-of-the-art DFB gasification plants mainly rely on manual operation or single-input single-output control loops, and scientific contributions only exist for controlling individual process variables. This leaves a research gap in terms of comprehensive control strategies for DFB gasification. To address this gap, we propose a multivariate control strategy that focuses on crucial process variables, such as product gas quantity, gasification temperature, and bed material circulation rate. Our approach utilizes model predictive control (MPC), which enables effective process control while explicitly considering process constraints. A simulation study is given demonstrating how different MPC parametrizations influence the behavior of the closed-loop system. Experimental results from a 100 kW pilot plant at TU Wien demonstrate the successful control achieved by the proposed control algorithm.
28 August 2020 in Biomass Conversion and Biorefinery
Natural gas is an important commodity in the European energy market. The gasification of biogenic residues and the further reaction to a methane-rich gas represent a promising concept for the production of synthetic natural gas on a fossil-free basis. This paper investigates the thermodynamics of methanation in a fluidized bed reactor for different product gas compositions of the dual fluidized bed gasification technology. The investigated product gases range from conventional steam gasification, over CO2 gasification, to product gases from the sorption enhanced reforming process. All investigated product gases from conventional steam gasification show an understoichiometric composition and therefore require a proper handling of carbon depositions and a CO2 separation unit downstream of the methanation reactor. The product gas from CO2 gasification is considered disadvantageous for the investigated process, because it only exhibits a carbon utilization efficiency of 23%. Due to the high flexibility of the sorption enhanced reforming process, a nearly complete methanation of the carbonaceous species is possible without the need for a CO2 separation step or the addition of steam upstream of the methanation reactor. Furthermore, the carbon utilization efficiency is found to be between 36 and 38%, similar to the results for conventional steam gasification. Temperature and pressure variations allow a thermodynamically optimized operation, which can increase the performance of the methanation and lower the extent of gas upgrading for grid feed-in. Additionally, if a higher hydrogen content in the natural gas grid would be allowed, the overall process chain could be further optimized and simplified.
12 September 2019 in Biomass Conversion and Biorefinery
A 100 kWth dual fluidized bed steam gasification pilot plant has been developed at TU Wien to convert different types of biogenic fuels into a valuable product gas. In this paper, the conversion of different biogenic fuels in combination with the utilization of CO2 as alternative gasification agent was investigated in the mentioned pilot plant. For this purpose, five experimental campaigns were carried out aiming at the investigation of softwood as reference fuel, and rapeseed cake, bark and lignin as alternative fuels. Pure olivine as well as a mixture (90/10 wt%) of olivine and limestone were used as bed materials. The product gas compositions of the different biogenic fuels changed depending on the elemental composition of the biogenic fuels. Thus, a high amount of carbon in the fuel enhanced CO formation, whereas an increased content of oxygen led to higher CO2 contents. Additionally, the presence of alkali metals in the biomass ash favoured the production of CO. The addition of limestone enhanced the H2 and CO contents via the water gas shift reaction as well as steam and dry reforming reactions, but had no significant effect on tar contents. Overall, this paper presents the feasibility of the dual-fluidized bed gasification process of different biogenic fuels with CO2 as gasification agent.
9 December 2022 in Energy