6 September 2024 in IEEE Antennas and Wireless Propagation Letters
The development of antenna systems that effectively balance low scattering with robust radiation performance is a key focus in antenna research. This study introduces an innovative frequency selective rasorber, designed to precisely control the transmission phase within a lossless layer. This integration results in high-gain, high-directivity, and effective stealth characteristics in antenna design. The transmission phase and frequency response of the lossless layer element is carefully tuned by the coupled resonator within its multilayer structure. Additionally, the impedance matching between the lossless layer and the lossy layer is finely tuned to optimize the electromagnetic (EM) absorption and reduce the radar cross section (RCS). The proposed phasecontrolled rasorber achieves a gain of 20.2 dB at 9.8 GHz and significant RCS reduction for bipolar polarized EM waves at lower frequencies, illustrating excellent radiation efficiency and stealth capabilities in antenna design.
15 May 2025 in IEEE Transactions on Microwave Theory and Techniques
Reconfigurable frequency selective rasorber (FSR) has garnered significant attention due to its in-band stealth ability for antennas. However, the robustness of stealth performance is constrained by wide passband and bias network. In this work, a wideband reconfigurable FSR with robust absorption is pro-posed by incorporating an absorption enhanced fusion bias (AEFB) network. Through the integration of resonances, the AEFB modifies the capacitive or inductive impedance characteristics of traditional bias into a more adaptable impedance, thereby aligning with and extending the absorption spectrum. The AEFB is symmetrically and orthogonally positioned with respect to the lossy layer to ensure polarization-independent operation. The AEFB-enhanced FSR is realized through a bilayer structure, exhibiting a passband spanning 3.81–4.29GHz (11.8%) and an absorption bandwidth exceeding 110%, achieved with a thickness of $0.107\lambda _{L}$ . The fabricated reconfigurable FSR integrated with AEFB exhibits effective rasorber, absorber, and polarization selection functionalities, thereby validating the design principles. This work opens new avenues for robust absorption and electromagnetic wave (EMW) manipulation through reconfigurable FSR.
14 October 2024 in Advanced Theory and Simulations
26 December 2025 in IEEE Antennas and Wireless Propagation Letters
Antenna systems combining high radiation performance with low radar cross-section (RCS) are essential for stealth applications. This work proposes a compact circularly polarized antenna array that achieves wideband low-RCS performance through a phase-balanced polarization conversion design. The bow-tie patch serves simultaneously as the radiating element and polarization converter, eliminating the need for additional stealth structures. The proposed unit achieves a polarization conversion ratio exceeding 85% from 7 to 15 GHz. Measurements show that the antenna array provides a 24.9% impedance bandwidth (9.5–12.2 GHz), an 8.8% axial-ratio bandwidth (10.2–11.2 GHz), and a peak gain of 10.02 dBic at 11.2 GHz. Additionally, over 10 dB of RCS reduction is maintained across 7–18 GHz for both x- and y-polarized incidences. The measured results agree well with simulations, validating the effectiveness of the phase-balanced design.
6 February 2026 in IEEE Transactions on Microwave Theory and Techniques
Frequency-selective rasorbers (FSRs) are essential for stealth and communication systems, but achieving broadband absorption on both sides of a wide transmission band remains challenging. In this work, a broadband FSR based on an offset resonance design is proposed. Geometric and impedance offsets are employed by arranging the core absorption layer (CAL) and the bandwidth extension layer (BEL) on opposite sides of a reference plane at 1/ $2\lambda _{0}$ from the frequency-selective surface (FSS), forming layer-specific resonance paths and staggered impedance matching. A dual-band matching (DBM) region associated with the 1/ $4\lambda _{\text {L}}$ and 3/ $4\lambda _{\text {H}}$ modes is thereby established, extending the matching bandwidth beyond the passband. Strong absorption near $f_{{0}}$ is provided by CAL, while BEL addresses the low- and high-frequency edges. Their resonances are fused across the DBM region to realize broadband absorption. The proposed FSR achieves a transmission bandwidth of 22.2%, with corresponding low- and high-frequency absorption bandwidths of 122.3% and 56.5%, respectively while maintaining a compact thickness of only $0.11\lambda _{\text {L}}$ . The fabricated FSR confirms the effectiveness of wideband absorption, validating the proposed design principle. This work establishes a new design framework for broadband FSRs and provides effective directions for wideband electromagnetic wave (EMW) absorption.
3 July 2026 in Nature Chemistry