1 November 2021 in Minerals Engineering
20 February 2023 in Structures
19 January 2023 in JAPAN ARCHITECTURAL REVIEW
Four‐point bending tests were conducted to investigate the flexural properties of fly‐ash‐based geopolymer concrete beams. Although geopolymer concrete has a stress–strain relationship with brittle compressive softening behavior, it can be used as a flexural member because it exhibits ductile bending moment–deflection relationships when used with compression reinforcing bars and transverse reinforcement. The test results revealed that the conventional design method can be used to estimate the bending moment–deflection relationship of geopolymer concrete beams. However, the stiffness reduction ratio for yielding must be modified to consider the difference in the modulus of elasticity between geopolymer concrete and ordinary Portland cement concrete.
20 May 2026 in SSRN Electronic Journal
The use of lightweight concrete offers a cost-effective method for floating structures of offshore wind turbines. Since floating structures are subjected to various types of cyclic loading, it is essential to investigate their fatigue behavior. Fatigue tests on lightweight concrete cylinders under water are conducted to investigate their fatigue behavior. The test results show that the admixture of silica fume and steel fibers in lightweight concrete enhances the fatigue life under water. Additionally, fatigue loading tests on unbonded post-tensioned lightweight concrete beams conducted underwater are used to investigate the effects of concrete admixtures and crack widths. The test results show that fatigue fracture of steel reinforcing bars determines the fatigue life of the beams. Finally, the fatigue failure mode and fatigue life of the beams are estimated based on the initial stress conditions of the concrete in the compression zone and the tensile steel reinforcement, and the estimated fatigue mode agrees well with the experimental results.