1 August 2020 in Additive Manufacturing
15 February 2023 in Additive Manufacturing
31 August 2024 in Nature Communications
Microstructures of additively manufactured metal parts are crucial since they determine the mechanical properties. The evolution of the microstructures during layer-wise printing is complex due to continuous re-melting and reheating effects. The current approach to studying this phenomenon relies on time-consuming numerical models such as finite element analysis due to the lack of effective sub-surface temperature measurement techniques. Attributed to the miniature footprint, chirped-fiber Bragg grating, a unique type of fiber optical sensor, has great potential to achieve this goal. However, using the traditional demodulation methods, its spatial resolution is limited to the millimeter level. In addition, embedding it during laser additive manufacturing is challenging since the sensor is fragile. This paper implements a machine learning-assisted approach to demodulate the optical signal to thermal distribution and significantly improve spatial resolution to 28.8 µm from the original millimeter level. A sensor embedding technique is also developed to minimize damage to the sensor and part while ensuring close contact. The case study demonstrates the excellent performance of the proposed sensor in measuring sharp thermal gradients and fast cooling rates during the laser powder bed fusion. The developed sensor has a promising potential to study the fundamental physics of metal additive manufacturing processes.
13 December 2021 in Microscopy Research and Technique
28 May 2026 in Journal of Quality Technology
2 July 2026 in The International Journal of Advanced Manufacturing Technology
Laser powder bed fusion is among the most promising methods for fabricating metal parts with complex geometries; however, ensuring consistent melting remains challenging, as highly dynamic heat accumulation from previous layers and melt tracks alters the pre-melting surface temperature for the subsequent ones. Such a phenomenon will result in inconsistent melt pool behavior, leading to shape inaccuracies and porosities. Existing works have attempted to address this issue by regulating printing parameters, either via feedforward modeling or sensor-based feedback control. Yet, a practical framework for stabilizing multiscale heat variation remains missing. This work combines two control approaches by linking finite element modeling-based heuristic tuning with sensor-based feedback laser power control. Specifically, a photoresistor-based PD laser power control method is used to maintain consistent melting within each layer, and the control target for each layer is determined via feedforward tuning and calibration. The method is validated through a proof-of-concept case study with parts featuring geometries that exhibit high global and local heat-accumulation risks. The maximum interlayer temperature has been reduced from 182 °C to 158 °C with combined feedback and feedforward control. Comprehensive inspections demonstrated a significant improvement in geometric accuracy and porosity reduction. For fine features such as thin-wall structures, the thickness error is reduced from 0.36 mm to 0.08 mm. Porosity count improved from 1.36 counts/mm2 to almost 0 in the sub-inspection window at the heat-accumulated regions.