1 April 1999 in Catalysis Today
1 January 2003 in Catalysis Today
1 May 1998 in Ultramicroscopy
1 January 1993 in Journal of the Chemical Society, Faraday Transactions
The chemisorption of hydrogen on two ceria samples (CeO2-BS, 4 m2 g–1; CeO2-SM, 56 m2 g–1) reduced at temperatures ranging from 623 to 1173 K has been studied by Fourier-transform infrared (FTIR) spectroscopy and temperature-programmed desorption followed by thermal conductivity (TPD-TC) and mass spectrometry (TPD-MS). The concentration of the oxygen vacancies created by the reduction treatments was determined by using a combination of O2 pulses and temperature-programmed oxidation. According to our TPD-MS study, hydrogen can be desorbed from ceria as both H2(reversible adsorption) and H2O (irreversible adsorption), the relative contribution of these two forms depending on the reduction temperature. For samples reduced at 773 K or higher temperatures, H2 was the only desorption product. From this observation, some earlier TPD-TC and TPR-TC results could be better understood. Upon reduction at 773 K, the amount of H2 chemisorbed per mole of CeO2 was ten times larger for CeO2-SM than for CeO2-BS. Likewise, the molar chemisorptive capability of CeO2-SM strongly decreased (45 times) with the reduction temperature. No simple relationship could be observed between the amount of chemisorbed hydrogen and the total concentration of oxygen vacancies in the oxide. In contrast to earlier results on the contribution of a massive bronze-like phase when chemisorbing H2 at 195–500 K, the results reported here show that the hydrogen chemisorption on reduced ceria is a surface-related process. Furthermore, the highest value for the hydrogen chemisorption we have obtained, 7.1 H atom nm–2(BET), suggests a pure surface process.
1 January 1996 in Journal of the Chemical Society, Faraday Transactions
High-resolution electron microscopy (HREM), combined with digital image processing and computer simulation techniques, has been used to carry out a microstructural characterization of some Rh/TiO2 catalysts reduced at 473, 773 or 823 K. A sample resulting from the reduction of the catalyst at 773 K, reoxidized with flowing O2 at 673 K and finally reduced at 473 K was also investigated. In contrast to earlier literature reports, the HREM images recorded here suggest the existence of some definite structural relationships between both the rutile and anatase titania microcrystals and the rhodium particles grown on them. Though some micrographs have been interpreted in terms of slightly reduced Magneli phases, our HREM study suggests that the major microstructural feature of the high temperature (773 and 823 K) reduced samples is the formation of an amorphous reduced titania phase, associated with which metal decoration occurs. Some metal sintering is also observed. The reoxidation treatment, although inducing reversal of the decoration process leads to larger metal particles than those of the starting low-temperature reduced catalysts. Note, also, that twinned metal particles are more often observed in the catalyst resulting from the mild reduction of the reoxidized sample.
1 July 1997 in Journal of Catalysis