This article investigates and compares two popular combined winding configurations for bearingless machines, the multiphase (MP) and dual-purpose no-voltage (DPNV) windings. Each of these winding configurations has the ability to independently create suspension force and drive torque using the same stator coils. The article develops analogous bearingless motor force and torque models, space vector equivalent circuits, and a current regulation architecture for each combined winding approach. A comprehensive comparison is made between the two combined winding topologies by using these analogous models and through an experimental study. It is shown that, from a motor design perspective, these combined winding topologies are equivalent for certain design conditions, but that each winding places very different demands upon the drive power electronics. The article concludes that the optimal choice of winding configuration depends on the machine parameters and the expected loading and drive cycle. When compared in terms of total current stress exerted on the bearingless drive, the MP winding is preferred when over half of the coil current is used to produce torque rather than force. In terms of the drive's volt-ampere rating, the DPNV winding is shown to be advantageous for high operating speeds and low torque values.
9 February 2023 in IEEE Transactions on Industry Applications
A generalized multi-phase (MP) combined winding design procedure for bearingless machines is proposed and developed. Using this procedure, new bearingless motor windings can be designed and conventional motor designs with MP windings can be transformed into bearingless motors by simply modifying the phase currents. The resulting MP winding is excited by two current components – one responsible for torque creation and another for suspension force creation. By applying the appropriate Clarke transformation, independent control of force and torque can be achieved. Although there are numerous papers in the literature studying bearingless machines with MP windings and their advantages, this is the first paper to provide a formal design procedure that can be applied to any MP winding configuration. The proposed approach can be used to realize popular winding designs, including concentrated- and fractional-slot windings, and is applicable to all radial-flux bearingless machines. The paper uses the Maxwell stress tensor to formulate the force/torque model for the MP combined winding and uses the results to derive design requirements. A sequence of winding design steps is proposed and used to design example MP combined windings. Experimental validation is provided using a six-phase bearingless induction machine prototype.
9 November 2023 in IEEE Transactions on Industry Applications
Multiphase electric machines offer benefits of fault tolerance and reduced power electronic switch ratings per phase. These machines are also capable of independently controlling multiple airgap fields with differing number of pole-pairs (spatial harmonics). This presents opportunity to improve torque density, magnetically levitate the rotor, and wirelessly transfer power to excite the rotor of wound-field synchronous machines. Although these performance improvement techniques have been studied separately in literature, there exists no general winding design approach that targets independent control of multiple airgap fields. This paper presents a generalized technique to design multiphase electric machine windings that can control the magnitude and angular location of multiple airgap magnetic fields, each with a different desired number of pole-pairs. Design examples are provided, and the control of different airgap harmonics is experimentally validated in two different prototype machines. The results show that the generalized approach presented in this paper is applicable across different motor topologies (radial and axial flux) and winding configurations (concentrated and distributed), demonstrating its utility for a wide range of application scenarios that benefit from the control of multiple airgap fields.
16 February 2021 in IEEE Transactions on Industry Applications
The parallel dual-purpose no-voltage (DPNV) winding topology offers appreciable advantages for high speed and significant power bearingless motor designs. Precision current regulation is required to realize the high-performance potential of bearingless motors using parallel DPNV windings. The performance of the machine hinges on the ability to decouple the voltage disturbance between the torque and suspension systems at all operating conditions, including high electrical frequencies. Two pathways are investigated to achieve precision actuation: 1) machine design and/or feedforward control to systematically reduce the voltage disturbance, and 2) direct digital design of the current regulator for high-speed operation. Analytical models are constructed, which gives insight into the root cause of the cross-coupling as a function of the physical winding design. It is shown that all practical machine designs produce some level of voltage disturbance which can be directly eliminated via a feedforward voltage added to the torque winding current regulator. The state-of-the-art current regulation methods for the parallel DPNV winding are progressed to enable extended operating ranges for the targeted high speed and bandwidth conditions. By codesigning the machine and controls, more optimized designs are possible by trading off torque ripple and force density.
17 October 2024 in IEEE Transactions on Industry Applications
This paper proposes and develops a new analytic bearingless machine model that incorporates multiple airgap harmonic field interactions and has several advantages. The model can be used to address levitation performance requirements by developing force/torque regulation methods to precisely calculate commands to current regulators. This allows relaxing constraints during the design stage and has the potential to enable consideration of higher performance bearingless machines. Furthermore, analogous to torque enhancement in conventional electric machines, the proposed model can be used to identify options for suspension force enhancement in bearingless motors by controlling multiple magnetic field harmonics. This paper provides a detailed derivation of the model and shows how it can be used to improve force regulation accuracy and enhance force capacity. The paper finds that by controlling four airgap harmonic fields, instead of the typical two harmonics, force capacity can be increased by approximately 40%. Hardware measurements using a 10-phase bearingless induction machine validate the proposed model and force capacity increase.
17 March 2021 in IEEE Transactions on Industry Applications
Electrification and hybridization of off-highway vehicles has the potential to yield significant fuel savings and air emissions improvements. However, developing the required components to electrify these systems is an extremely challenging task due to high force and power density requirements and highly variable drive cycles. This paper investigates a new approach to off-highway vehicle electrification based around a linear piston pump integrated into a linear actuator. The paper first reviews linear actuator machine topologies within the context of the charge pump application requirements. A tubular machine topology is optimized for integration with a hydraulic pump and experimentally validated using a prototype machine. A multi-physics simulation framework is developed to simulate the entire charge pump design with a position regulator. An optimized design is proposed with an oscillation frequency of 132 Hz and a total system efficiency (pump and motor) calculated to be 81.3% at full load.