A chirped Bragg grating fibre external cavity semiconductor laser is hybridly modelocked to generate light pulses with perfectly linear wavelength chirp, resulting in Fourier-transform-limited 2.5 ps pulses incorporated with subsequent chirp compensation. The setup facilitates wavelength tunability across the whole grating bandwidth (15 nm) by changing the modulation frequency.
An on-chip, high-extinction-ratio transverse electric (TE) pass polarizer utilizing a silicon oxynitride (SiON) slab has been proposed and experimentally verified. The power confinement ratio of the mode field is manipulated by using a SiON slab, where most of the power of the transverse magnetic (TM) mode is transferred to the upper SiON slab and then attenuated through radiation, while the TE mode passes through with relatively low propagation loss. Experimental results show that our proposed device can achieve an extinction ratio that varies from 20.5 to 32.7 dB in the wavelength range of 790 to 870 nm, with an insertion loss of 0.6 to 1.7 dB. Potentially, this design has lower material refractive index contrast, larger minimum etching size, smaller lengths, and less stray light crosstalk, which is beneficial for systems applications such as gyroscopes.
Measurement of the heart’s efficiency plays a key role for cardiac monitoring. Since 1970, doctors have injected patients with cold solution to measure their hearts’ blood output [1]. A flow-directed thermodilution catheter is inserted into the right atrium of the heart. The catheter allows the solution to be injected directly into the heart and enables measurement of the temperature of the blood in the pulmonary artery. By combining temperature readings with pulse rate, doctors can determine how much blood the heart pumps. Such types of catheters with conventional thermistor and thermocouple devices have been commercially available for many years and are still widely used in practice. However, as these sensors are electrically active they are not appropriate for use in a number of medical applications, in particular, in high magnetic fields associated with NMR machines. Fibreoptic sensors can overcome this problem as they are dielectric and hence virtually immune to electromagnetic interference