1 April 2012 in Journal of Biomedical Informatics
8 February 2021 in Journal of Dispersion Science and Technology
In order to investigate the electro-optical characteristics of the current polymer dispersed liquid crystal (PDLC) film, zinc acrylate nanoparticles (NPs) were doped into the PDLC prepared samples. Generally for the fabrication of NPs–based PDLC film, two conventional methods such as the sandwich method and capillary methods are considered. In the conventional fabrication method of Np-doped PDLCs, the homogenous distribution of nanoparticles remained an unresolved issue. Particularly, upon the fabrication of Np-doped PDLC films, it is important to emphasis that nanoparticles are uniformly distributed inside the indium tin oxide (ITO) coated glass. For the purpose, here in this work, a new PDLC manufacturing method has been proposed to improve such shortcoming. Unlike the conventional method, the NPs acrylate layer was first coated on the ITO glass, which maintained evenly distributed NPs and then was placed onto the polymer/LC crystal mixture. By adopting the current PDLC fabricated method (with 1.0 wt% ZnA layer coating into PDLC film) the transmittance remained 93.9% and a good contrast ratio (CR) ∼ 7.0 was observed at a low driving voltage (∼ 20 V). Moreover the morphology study of current PDLCs showed a uniform size distribution of droplet morphology as well as a homogeneous distribution of NPs. Thus our investigations indicated that PDLC films prepared by this new technique achieved the goal of uniform distribution of NPs particles, homogeneous distribution of droplet morphology with the improved electro-optical characteristics. Graphical Abstract
10 August 2012 in Liquid Crystals
In this paper, multidirectional light-control reflective (LCR) films are developed in order to create an active reflective structure that will enhance the image brightness and contrast ratio of reflective dye-doped polymer-dispersed liquid crystal (D-PDLC) displays at lower viewing angles. Advantages of LCR films are that their production is low cost and they require a simple photolithographic fabrication method. The optimum design prism-type light-control reflective film succeeded in minimising the surface scattering effect; thus, the contrast ratio is much enhanced. The symmetric and asymmetric LCR films produced multidirectional scattering that enhances the reflectance at lower viewing angles, which has importance in future display applications. In particular, the prism LCR film has been found to be more influential on the reflectance of D-PDLC films due to multidirectional scattering of light by non-symmetric arrays. The improvement in contrast ratio has been confirmed by the enhancement of optical properties for reflective D-PDLC displays at lower viewing angles below 30°.
6 May 2020 in International Journal of Interactive Mobile Technologies (iJIM)
Sentiment Analysis of Impact of Technology on Employment from Text on Twitter