Hydroxypropyl-cellulose (HPC), a derivative of naturally abundant cellulose, can self-assemble into helical nanostructures that lead to striking colouration from Bragg reflections. The helical periodicity is very sensitive to pressure, rendering HPC a responsive photonic material. Recent advances in elucidating these HPC mechano-chromic properties have so-far delivered few real-world applications, which require both up-scaling fabrication and digital translation of their colour changes. Here we present roll-to-roll manufactured metre-scale HPC laminates using continuous coating and encapsulation. We quantify the pressure response of the encapsulated HPC using optical analyses of the pressure-induced hue change as perceived by the human eye and digital imaging. Finally, we show the ability to capture real-time pressure distributions and temporal evolution of a human foot-print on our HPC laminates. This is the first demonstration of a large area and cost-effective method for fabricating HPC stimuli-responsive photonic films, which can generate pressure maps that can be read out with standard cameras.
Conducting polymers are a key component for developing wearable organic electronics, but tracking their redox processes at the nanoscale to understand their doping mechanism remains challenging. Here we present an in-situ spectro-electrochemical technique to observe redox dynamics of conductive polymers in an extremely localized volume (<100 nm3). Plasmonic nanoparticles encapsulated by thin shells of different conductive polymers provide actively tuned scattering color through switching their refractive index. Surface-enhanced Raman scattering in combination with cyclic voltammetry enables detailed studies of the redox/doping process. Our data intriguingly show that the doping mechanism varies with polymer conductivity: a disproportionation mechanism dominates in more conductive polymers, while sequential electron transfer prevails in less conductive polymers.
Plasmonic metafilms have been widely utilized to generate vivid colors, but making them both active and flexible simultaneously remains a great challenge. Here flexible active plasmonic metafilms constructed by printing electrochromic nanoparticles onto ultrathin metal films (<15 nm) are presented, offering low‐power electricallydriven color switching. In conjunction with commercially available printing techniques, such flexible devices can be patterned using lithography‐free approaches, opening up potential for fullyprinted electrochromic devices. Directional optical effects and dynamics show perceived upward and downward colorations can differ, arising from the dissimilar plasmonic mode excitation between nanoparticles and ultrathin metal films.
High quality (Q) factor, tunable unidirectional guided resonances (UGRs) based on a silicon-on-lithium niobate (Si-on-LN) photonic crystal (PhC) slab are proposed and numerically investigated. The Q factors of UGRs decay quadratically with respect to the distance from the Γ point to the wave vector along the Γ-X direction, and high Q factor UGRs are obtained by moving UGR close to the Γ point. Also, a Gires–Tournois interferometer (GTI) based on a UGR with a Q factor of 9465 is numerically demonstrated, which produces a maximum group delay of 30 ps around 1.55 μm with unitary reflectance. The group delay and operation wavelengths of the GTI can be adjusted effectively by tuning the refractive index of lithium niobate (LN) and the periods of the silicon bars. Our study may find applications in PhC surface-emitting lasers, dispersion compensation, and compression of light pulses.
We propose a type of reflectionless graphene perfect absorber (GPA) in which the reflection channel is forbidden, while the transmission channel is open. Peak absorption of 99.97% in the near-infrared is numerically demonstrated for monolayer graphene loaded on a one-dimensional silicon photonic crystal slab with rhomboid cross sections that supports parity symmetric unidirectional guided resonances (UGRs). Based on the proposed GPA, a transmissive optical modulator with a modulation depth of about 28 dB and an insertion loss of 0.31 dB by varying the Fermi energy level graphene from 0.3 eV to 0.7 eV is numerically presented. Remarkably, the design strategy can be straightforwardly applied to other two-dimensional (2D) materials. Our study may find promising applications in 2D material-based optical modulators and filters.