1 April 2023 in Digital Communications and Networks
15 May 2024 in Geophysics
The borehole-to-surface electromagnetic (BSEM) method complements surface and airborne electromagnetic (EM) methods. The borehole is typically filled with conductive media, which significantly impacts the responses. To accurately simulate the responses, the borehole needs to be modeled. However, the size of the borehole is very small compared with the entire computational domain, making it challenging to discretize the borehole accurately. We develop a high-accuracy 3D finite-element forward-modeling algorithm for the BSEM method using octree meshes. The basic idea of octree meshes is to locally refine the mesh by dividing the hexahedral element into eight smaller elements. This approach has the advantage of being able to accurately discretize small geometric features while using coarse meshes in other areas, thus reducing the computational cost. In addition, high-order basis functions are used to improve the accuracy of numerical solutions. We develop a 3D forward-modeling code for BSEM using the C++ programming language. We verify the correctness and accuracy of our implementation by comparing the numerical responses with analytical solutions. Furthermore, we determine the influence of the borehole on the EM responses, showing that the borehole will cause a decrease of several orders of magnitude in the responses when the borehole is filled with highly conductive media. We also use two 3D models to demonstrate the efficacy of octree meshes in the discretization of complex structures and to discuss the effectiveness and sensitivity of BSEM data in the exploration of mineral and oil-gas resources. The code is open source under the Massachusetts Institute of Technology license and can be used as an accurate modeling tool for BSEM responses, providing useful guidance for field exploration. The code is designed with a modular architecture, ensuring ease of maintenance and the ability to extend to other EM methods and serve as the foundation for 3D inversion.
15 June 2023 in Computers & Geosciences
6 November 2024 in Geophysics
Accurate and efficient 3D controlled-source electromagnetic (CSEM) forward modeling is crucial for deciphering CSEM responses in complex geologic contexts and assessing the efficacy of survey designs. It also serves as the foundation for 3D inversion, a critical technique for interpreting CSEM data. We present a novel hp-adaptive finite-element method for 3D CSEM forward modeling. This method enhances the traditional h-adaptive approach, which only refines the mesh while keeping the polynomial degree of the basis functions constant, by enabling simultaneous refining of the mesh and increasing the polynomial degree of the basis functions. High-order elements yield superior approximations when the solution exhibits sufficient smoothness, whereas mesh refinement enhances accuracy in regions with less smooth solutions. The adaptive refinement process is guided by a goal-oriented error estimator that relies on the residual of the governing equation and the continuity of electromagnetic fields. The hp-adaptive strategy, which determines whether to refine elements or increase their polynomial degree, is based on the refinement levels of the elements. Constraints are applied to hanging nodes, introduced during the refinement process, to ensure the continuity of the finite-element space. We validate the accuracy, efficiency, and convergence of the hp-adaptive method through tests on two layered models. Further simulations on a topographic model and a realistic model corroborate its effectiveness. Our findings indicate that the hp-adaptive method outperforms the traditional h-adaptive method in terms of accuracy, convergence rate, and computational cost, making it a promising technique for 3D CSEM forward modeling.
13 October 2023 in IEEE Transactions on Geoscience and Remote Sensing
The accurate and efficient forward modeling of the transient electromagnetic (TEM) method requires proper mesh generation, which influences both calculation speed and response accuracy. This paper presents a three-dimensional (3D) TEM forward modeling method that achieves high accuracy by using a frequency-domain to time-domain transformation strategy and adaptive mesh refinements in the frequency-domain. Specifically, an interpolation-based Fourier transform method is employed to reduce the number of computed frequencies in the frequency-domain, resulting in significant efficiency improvement without compromising accuracy. Furthermore, the method incorporates unstructured tetrahedral meshes and an adaptive finite element algorithm based on posterior error estimators to enhance the accuracy of the frequency-domain response calculation. The proposed method is applied to the widely used long-offset TEM (LOTEM) system. The accuracy of the method is verified by comparing the simulated response of a layered model with the analytical solution. Additionally, the effectiveness of the algorithm is tested using three 3D models. Cross-validation results with other popular open-source codes demonstrate that the proposed method can achieve high accuracy and efficiency for both simple and complex models.
26 September 2024 in IEEE Transactions on Geoscience and Remote Sensing
Electromagnetic (EM) methods are widely used in geophysical exploration. Different EM methods offer varying detection depths and resolutions. Magnetotelluric (MT) typically provides information about deep structures, whereas controlled-source EM (CSEM) is more effective in imaging shallow targets. To enhance the resolution of subsurface structures, a joint inversion of MT and CSEM data is proposed. In this paper, we combine MT and CSEM data and perform joint inversion using the Limited-memory Broyden-Fletcher-Goldfarb-Shanno (L-BFGS) algorithm. To balance the two data types, we propose a data weighting scheme based on the square root of the ratio of the number of data points. To improve the accuracy of forward responses and the reliability of the inversion, we use a high-order adaptive finite element forward modeling method. The forward modeling mesh and inversion mesh are decoupled to prevent the over-parameterization of the inversion mesh. Additionally, this approach uses an algorithm based on posteriori error estimators to guide the adaptive refinement process of the forward modeling mesh. The accuracy and efficiency of the forward modeling method are verified using a layered model. The inversion results of two complex models demonstrate that the joint inversion method offers superior resolution compared to standalone inversions.