20 July 2022 in Lasers in Manufacturing and Materials Processing
Ultrafast laser texturing allows the generation of micro- and nanostructures on steel substrates. Laser-ablated textures show a wide range of structure geometries, from the micro to the nanoscale, which can enable plastic product functionalization. Polymer processing technologies are used to replicate mold textures on a large manufacturing scale. To enable new product functionalities, developing novel texture geometries is critical. The laser-ablated texture dimensions are primarily linked to the laser light properties, such as the laser wavelength, thus limiting the achievable structure shapes. This work uses ultrafast laser to manufacture textures in air and water environments. The effect of the different mediums on structures formation is characterized. The irradiation is performed over a wide range of fluence values. The texture geometry and characteristics are evaluated by scanning electron microscopy. For decreasing fluence values, the structures transitioned from micro bumps, to LIPSS, to nanostructures, regardless of the irradiation environment. Conversely, structure morphology is affected by the irradiation environment. The LIPSS pitch is lower for the underwater environment due to the change in the laser angle of incidence, which changes with the refraction index ratio of the air and water. A novel nano-lamellae texture was generated when irradiating the steel surface underwater at relatively low fluence. The dynamics of different LIPSS generations are discussed, considering the irradiation medium’s optical, thermal, and physical properties.
1 December 2023 in AIP Advances
The nonlinear optical properties of gold thin films have been studied under the irradiation of destructive laser pluses. The transmissivity and the reflectivity of a 100-nm-thick gold film are measured with femtosecond laser irradiations up to 106 J/m2 fluence, which is much higher than the damage threshold of gold. The nonlinearity is calculated with Fresnel loss equations. The real part of the complex refractive index is calculated to have a peak at ∼10 kJ/m2, which is close to the damage threshold. The complex third-order nonlinear susceptibility χ3 is estimated to be (4.95 − 2.02i) × 10−21 m2/V2, which agrees with the trend in previous reports that it decreases as the pulse duration decreases. This nonlinearity is further studied with a plasmon-photon exchange (PPE) model, where laser induced plasmons and absorbed photons are strongly correlated. The result of the simulation with the PPE model is in good agreement with the experimental transmissivity above the damage threshold. The model predicted an interaction time between photons and plasmons to be about 500 fs. This model is found to be essential in understanding such nonlinear optical processes under both extremely high and conventionally low laser irradiations.