We report a unique low-temperature growth method for epitaxial GaN on Si(111) substrates via a buffer layer. The method utilizes the decomposition of a single gas-source precursor on the substrate surface to form GaN. The film growth process is further promoted by irradiation of ultraviolet light to enhance the growth rate and ordering of the film. The best epitaxial film quality is achieved at a growth temperature of with a growth rate of . The films exhibit intense photoluminescence emission at with a single peak at , indicative of band-edge emission for a single-phase hexagonal GaN film. The growth process achieved in this study is compatible with low Si processing temperatures and also enables direct epitaxy of GaN on in contrast to conventional metalorganic chemical vapor deposition based approaches.
1 October 2021 in ECS Journal of Solid State Science and Technology
Temperature is one of the parameters that needs to be continuously monitored and controlled during handling, storage, and transportation to achieve repeatable and consistent CMP performances. Here, we investigated the effect of three different storage temperatures (15, 25, and 45oC) on several slurry health parameters (particle size, zeta potential, pH, total dissolved solids, conductivity, and dissolved oxygen (DO) concentration) of a ceria-based slurry and also on removal rates of SiO2 films during polishing. The changes in all the parameters of slurries stored at 15oC and 45oC for three weeks, except for DO concentration, were reversible and returned to their values at 25oC when the slurries were brought back to 25oC. DO concentration increased by ~14 % and decreased by ~18 % in the slurries stored for three weeks at 15oC and 45oC, respectively, compared to that of ceria slurry stored at 25oC. They did not return to the original values even after keeping them at 25oC for 6 hours. The increase in storage temperature causes an increase in the adsorption of dissolved oxygen onto the ceria surface, which can transform Ce3+ species into less reactive Ce4+-superoxo or a Ce3+-peroxo species, resulting in lower SiO2 removal rates.