7 May 2021 in IEEE Photonics Journal
In free-space optical (FSO) communication, high-precision pointing is a critical technology required for rapid acquisition to reduce link establishment time and increase communication time. FSO communication on a motion platform is necessary to expand the communication area and to promote the establishment of a global communication network. However, the pointing accuracy of an optical communication terminal on a motion platform is low due to numerous error sources and error coupling. This paper evaluates the error sources and proposes a pointing model to avoid problems resulting from error coupling. This proposed pointing model was designed to improve the pointing accuracy of a gimbals-type optical communication terminal (GOCT) on a motion platform. The effectiveness of the proposed pointing model was verified by tracking star experiments. The modified residual error of the proposed point model was 94.8 μrad compared to 1324.2 μrad without correction. Additionally, the modified residual error was 94.8 μrad of the proposed pointing model compared to 140.2 μrad of the existing model. The actual open-loop pointing error was reduced from 150.4 μrad of the existing model to 101.3 μrad of the proposed model. Thus, the pointing accuracy of a GOCT on a motion platform was significantly improved after correction by the proposed pointing model.
8 November 2022 in IEEE Photonics Journal
High-precision pointing is a key technology in free-space optical communication, as it improves the acquisition probability and reduces the acquisition time. High-precision pointing of an optical communication terminal (OCT) on a motion platform is particularly important for establishing a global communication network. An OCT on a motion platform is subjected to both linear and nonlinear pointing errors. The present paper analyzes both types of pointing errors in detail. Linear pointing errors can be well corrected by the parameter model. This paper proposes a K-nearest neighbor (KNN) algorithm that corrects nonlinear pointing errors and verifies its effectiveness through tracking star experiments. After correcting the nonlinear pointing errors through KNN algorithm, the modified and actual open-loop pointing errors were 69.0 and 70.8 μrad, respectively, reduced from 87.3 and 91.9 μrad, respectively, in the parameter model. Thus, the proposed KNN algorithm can effectively improve the pointing accuracy of an OCT on a motion platform.
16 July 2024 in IEEE Photonics Journal
Vehicular quantum communication terminals (VQCTs) are crucial for establishing global-scale quantum networks. High-precision line-of-sight (LOS) pointing is essential for fast and reliable acquisition in satellite-based quantum key distribution (QKD). The pointing accuracy of VQCTs is affected by attitude measurement errors, mechanical structure errors, and structural instability errors resulting from platform movement. By mounting attitude sensors on the LOS of VQCTs, we directly measure the LOS attitude. This completely eliminates the impact of mechanical structure errors and structural instability errors on pointing accuracy. Furthermore, we propose a line-of-pointing calibration method and a pointing model for VQCTs based on LOS attitude measurement. The pointing accuracy of this model is primarily reliant on the accuracy of attitude sensors. Two experiments were conducted to validate the effectiveness of our model. One is the star pointing experiment, comparing with the existing pointing model for VQCTs, our model significantly reduces the pointing errors by 93%, from 1296″ to 87.8″. This substantiates that our model eliminates mechanical structure errors and structural instability errors. Another is the successful acquisition of a quantum communication satellite, which demonstrates the feasibility of the proposed model for implementing the satellite-to-motion platform QKD and global-scale quantum networks.
22 February 2023 in Applied Optics
Optical communication terminals (OCTs) with high pointing accuracy on motion platforms are highly important for establishing a global communication network. The pointing accuracy of such OCTs is seriously affected by linear and nonlinear errors generated by various sources. A method based on a parameter model and kernel weight function estimation (KWFE) is proposed to correct the pointing errors of an OCT on a motion platform. Initially, a parameter model, which has a physical meaning, is established to reduce the linear pointing errors. Then, the nonlinear pointing errors are corrected using the proposed KWFE method. Tracking star experiments are conducted to verify the efficiency of the proposed method. The parameter model reduces the initial pointing error associated with the stars used for calibration from 1311.5 µrad to 87.0 µrad. After applying parameter model correction, the KWFE method is applied to further reduce the modified pointing error associated with the stars used for calibration from 87.0 µrad to 70.5 µrad. Additionally, based on the parameter model, the KWFE method reduces the actual open-loop pointing error associated with the target stars from 93.7 µrad to 73.3 µrad. The sequential correction using the parameter model and KWFE can gradually and effectively improve the pointing accuracy of an OCT on a motion platform.
9 December 2024 in Applied Optics
Optical communication telescopes (OCTs) on motion platforms are essential for the establishment of global-scale optical communication networks. OCTs with high pointing accuracy can reduce acquisition time and increase acquisition probability. The pointing accuracy of OCTs is influenced by mechanical structure errors, structural wobble errors, and attitude measurement errors. Existing pointing error correction models for OCTs on motion platforms have limitations in addressing these errors. In this paper, we propose an innovative, to our knowledge, stellar correction pointing model based on line-of-sight (LOS) attitude measurements on motion platforms to improve the pointing accuracy. Initially, the stellar correction model compensates for the attitude measurement errors. Then, guide angles are calculated using the LOS attitude, which eliminates the mechanical structure errors and the structural wobble errors. To validate the effectiveness of the model, we built an OCT system on a motion platform and conducted star pointing experiments. The experimental results show that, compared with the existing model, our model reduces the pointing error by 37.2%, from 24.5 to 15.37 arcsec RMS. Therefore, the stellar correction pointing model based on the LOS attitude measurements is an effective method for improving the pointing accuracy of OCTs on motion platforms.