14 June 2021 in Optical Materials Express
We report a method to dynamically control the surface of gallium-based liquid metal to switch between reflective/diffusive states by removing/depositing oxide films via electrochemical redox reactions. Electrochemical oxidation deposits rough surface oxides that are optically diffusive. Electrochemical reduction returns the metal to a pristine, smooth, and reflective state. This switching is achieved using only ±1.4V. In addition, a meniscus of liquid metal can be pumped to switch between concave/convex shapes. This work expands the range of optical applications of dynamic liquid metal surfaces.
7 February 2023 in Laser & Photonics Reviews
1 February 2000 in Journal of Applied Physics
18 May 2022 in Advanced Photonics Research
The main practical method for fabricating fine optical structures involves mounting them on the surface of a substrate. Although there are other methods for fabricating structures inside materials, none involves the fabrication of optical structures, particularly resonator structures. Thus, a novel method, namely, infill printing in which a resonator structure is embedded in a nanoporous film, is demonstrated to fabricate optical structures. The highly transparent nanoporous film comprises nonspherical SiO2 nanoparticles with a diameter of ≈12 nm. The voids in the nanoporous film are interconnected, facilitating the penetration of polymers exhibiting a diameter of 2–3 nm. By filling the voids in the nanoporous film with a hyperbranched polymer via the printing method, the refractive index can be uniformly controlled, and the optical structures can be embedded. Using infill printing, this is the first time a microdisk resonator exhibiting a reasonable quality factor inside a nanoporous film is successfully demonstrated just as “writing on paper.”
15 April 2025 in Advanced Photonics Research
FSFrederik van Schoonhoven
+1
Whispering gallery mode (WGM) microcavities, which have been extensively studied for their ultrahigh Q factors and small mode volumes, are exceptional platforms for achieving ultralow‐threshold microlasers and functional resonators. However, the rotational symmetry of these structures traps light inside, resulting in an isotropic output and limiting their use in photonics. Special structural modifications are required to achieve a unidirectional light output in WGM cavity lasers. This study introduces and experimentally validates a novel method for achieving unidirectional light propagation in lasing microrings. Spatial symmetry is broken by integrating tilted azimuthal gratings on the inner wall of the microring. Consequently, clockwise and counterclockwise propagating WGMs exhibit distinct propagation losses and backscattering coefficients depending on the tilt angle of the grating, thereby enabling a controllable direction. This advancement paves the way for enhanced applications in integrated photonics such as unidirectional light sources and orbital angular momentum emitters, thereby expanding the functional capabilities of WGM microcavities.
3 August 2022 in Advanced Photonics Research