12 August 2016 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
Photonic network-on-chip (PNoC) is a promising candidate to replace traditional electrical NoC in manycore systems that require substantial bandwidths. The photonic links in the PNoC comprise laser sources, optical ring resonators, passive waveguides, and photodetectors. Reliable link operation requires laser sources and ring resonators to have matching optical frequencies. However, inherent thermal sensitivity of photonic devices and manufacturing process variations can lead to a frequency mismatch. To avoid this mismatch, micro-heaters are used for thermal trimming and tuning, which can dissipate a significant amount of power. This paper proposes a novel FreqAlign workload allocation policy, accompanying an adaptive frequency tuning (AFT) policy, that is capable of reducing thermal tuning power of PNoC. FreqAlign uses thread allocation and thread migration to control temperature for matching the optical frequencies of ring resonators in each photonic link. The AFT policy reduces the remaining optical frequency difference among ring resonators and corresponding on-chip laser sources by hardware tuning methods. We use a full modeling stack of a PNoC that includes a performance simulator, a power simulator, and a thermal simulator with a temperature-dependent laser source power model to design and evaluate our proposed policies. Our experimental results demonstrate that FreqAlign reduces the resonant frequency gradient between ring resonators by 50%-60% when compared to existing workload allocation policies. Coupled with AFT, FreqAlign reduces localized thermal tuning power by 19.28 W on average, and is capable of saving up to 34.57 W when running realistic loads in a 256-core system without any performance degradation.
2 September 2015 in ACM Journal on Emerging Technologies in Computing Systems
Resource pooling, where multiple architectural components are shared among cores, is a promising technique for improving system energy efficiency and reducing total chip area. 3D stacked multicore processors enable efficient pooling of cache resources owing to the short interconnect latency between vertically stacked layers. This article first introduces a 3D multicore architecture that provides poolable cache resources. We then propose a runtime management policy to improve energy efficiency in 3D systems by utilizing the flexible heterogeneity of cache resources. Our policy dynamically allocates jobs to cores on the 3D system while partitioning cache resources based on cache hungriness of the jobs. We investigate the impact of the proposed cache resource pooling architecture and management policy in 3D systems, both with and without on-chip DRAM. We evaluate the performance, energy efficiency, and thermal behavior for a wide range of workloads running on 3D systems. Experimental results demonstrate that the proposed architecture and policy reduce system energy-delay product (EDP) and energy-delay-area product (EDAP) by 18.8% and 36.1% on average, respectively, in comparison to 3D processors with static cache sizes.