We present the first winter season of surface height and sea ice freeboards of the Arctic Ocean from the new ICESat‐2 (IS‐2) mission. The Advanced Topographic Laser Altimeter System (ATLAS) onboard has six photon‐counting beams for surface profiling with a 10‐kHz pulse‐rate (inter‐pulse distance ~0.7m) and footprints of ~17m. Geolocated heights assigned to individual photons scattered from the surface allow significant flexibility in the construction of height distributions used in surface finding. For IS‐2 sea ice products, a fixed 150‐photon aggregate is used to control height precision and obtain better along‐track resolution over high reflectance surfaces. Quasi‐specular returns in openings as narrow as ~27m, crucial for freeboard calculations, are resolved. The fixed photon aggregate results in unique variable along‐track resolutions and non‐uniform sampling (17m×27m to 17m×200m for the strong beams) of the surface. The six profiling beams – three pairs separated by 3.3 km with a strong and weak beam in each pair – provide correlated statistics at regional length scales for assessment of beam‐to‐beam retrieval consistency and accuracy. Analysis shows along‐track height precisions of ~2cm, and agreement in the monthly freeboard distributions across the strong beams to 1‐2cm. In this paper, we describe briefly the approaches used in surface height and freeboard retrievals from ATLAS photon clouds, and detail the key features of these along‐track sea ice products, focusing on the first release of data collected over the Arctic Ocean, which spans the period between October 14, 2018 – the start of data collection – and the end of March 2019.
2 November 2017 in Journal of Geophysical Research: Oceans
The Advanced Topographic Laser Altimeter System (ATLAS) was launched aboard the Ice Cloud and land‐Elevation Satellite‐2 (ICESat‐2) satellite in September 2018. ATLAS is a single wavelength (532 nm) lidar system designed to acquire high resolution measurements of the earth's surface while also obtaining atmospheric backscatter from molecules, clouds, and aerosols. Because ATLAS is optimized for altimetry, the atmospheric data acquired is unique in many respects and requires non‐standard analysis techniques. For example, the high repetition rate laser limits the vertical extent of the profiles to just 14 km and causes atmospheric scattering from above 15 km to be added to the scattering in the lower 0–14 km profile. In addition, the limited vertical range of the acquired profiles renders it difficult to compute the magnitude of the solar background and hinders the application of standard calibration techniques. Despite these limitations, methods have been developed to successfully produce data products that have value to the atmospheric community for cloud and aerosol research and are currently available at the National Snow and Ice Data Center (NSIDC). In this paper we describe the ICESat‐2 atmospheric channel and the methods used to process the ATLAS raw photon count data to obtain calibrated backscatter and higher level products such as layer heights and type, blowing snow, column optical depth and apparent surface reflectance.
Tenuous atmospheric layers, such as high, thin cirrus clouds and blowing snow over Antarctica, play an important role in the climate system, affecting energy fluxes between the Earth and the atmosphere. Our knowledge of the structure of the atmosphere is largely derived from atmospheric satellite measurements. Yet tenuous layers can be hard to detect in satellite lidar data, especially in daylight data characterized by high solar background. In this study, we introduce an approach to detect tenuous atmospheric layers in the atmospheric lidar measurements of NASA's ICESat‐2. The density‐dimension algorithm for ICESat‐2 atmospheric data (DDA‐atmos) identifies atmospheric layers while automatically adapting to different background conditions of night, twilight, and daylight data. This capability, demonstrated for tenuous clouds and blowing snow, offers a data‐based solution to an important climate modeling problem. Atmospheric layer boundaries, detection confidence, and density fields resultant from the DDA‐atmos are reported in ICESat‐2 atmospheric data product ATL09.
NASA's ICESat‐2 mission measures Earth's elevation with the Advanced Topographic Laser Altimeter System (ATLAS), a 6‐beam photon‐counting laser altimeter. The Global Geolocated Photon data product (ATL03) is the primary source of photon information used by surface‐type‐specific higher‐level products, along with the Atmospheric Layer Characteristics product (ATL09). ATL03 provides time‐tagged, geolocated photon heights referenced to the ellipsoid and a parameter providing an initial classification of photon events as signal or background. We use this classification to evaluate ATLAS radiometry (number of signal photons per transmitted laser pulse) over short time scales and over the mission to date. The radiometric performance of ATLAS will in part determine what differences in the signal and background photon rates are significant and indicate geophysical, rather than instrumental, changes. We find the ATLAS radiometry is very stable over short time scales and exhibits a long‐term decrease of ∼1 signal photon per laser pulse (∼−12%) in the strong spots over the first 1.5 years of the mission.
The Ice, Cloud, and land Elevation Satellite‐2 (ICESat‐2) is a NASA Earth observing satellite mission that provides global elevation measurements using the Advanced Topographic Laser Altimetry System (ATLAS). ICESat‐2 was launched in September 2018 and completed its prime mission of 3 years of on‐orbit science data collection in December 2021. ICESat‐2, as the successor mission to ICESat (2003–2009) (Schutz et al., 2005, https://doi.org/10.1029/2005gl024009), was designed to provide global elevation measurements of Earth's surfaces. Changes in elevation, such as those over glaciers, ice sheets and sea ice, are some of the most critical observations for characterizing and understanding Earth's dynamic processes and the response to climate variability. The overarching scientific goals of ICESat‐2 are associated primarily with the cryosphere, but from a space‐based platform, the altimeter measurements serve a wide range of science disciplines. Prior to launch during the early mission development phase, the Level 1 Science Requirements were established, which at the time were some of the most stringent metrics created for space‐based altimetry. These requirements were the primary drivers of both the instrument technology development and the mission operational strategies. Here, we evaluate each of the science requirements using the science data collected over the prime mission timeline of 3 years. We conclude from our analyses that the mission has successfully met each of the Level 1 Science Requirements. Further, we evaluate the onboard consumables (fuel and laser energy) and demonstrate that the satellite's operational lifetime could potentially last an additional ∼10 years.