John Vennekate

John Vennekate

Auto-generated profile, based on publicly available information

John Vennekate

Thomas Jefferson National Accelerator Facility

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 April 2023 in Physical Review Accelerators and Beams
Verified
Journal Article
Open access
PDF file
GCG. Ciovati
G. Ciovati
JAJ. Anderson
J. Anderson
SBS. Balachandran
S. Balachandran
GCG. Cheng
G. Cheng
BCB. Coriton
B. Coriton
DVD. Vollmer
D. Vollmer
The higher efficiency of superconducting radio-frequency (SRF) cavities compared to normal-conducting ones enables the development of high-energy continuous-wave linear accelerators (linacs). Recent progress in the development of high-quality Nb3Sn film coatings along with the availability of cryocoolers with high cooling capacity at 4 K makes it feasible to operate SRF cavities cooled by thermal conduction at relevant accelerating gradients for use in accelerators. A possible use of conduction-cooled SRF linacs is for environmental applications, requiring electron beams with energy of 1–10 MeV and 1 MW of power. We have designed a 915 MHz SRF linac for such an application and developed a prototype single-cell cavity to prove the proposed design by operating it with cryocoolers at the accelerating gradient required for 1 MeV energy gain. The cavity has a ∼3  μm thick Nb3Sn film on the inner surface, deposited on a ∼4  mm thick bulk Nb substrate and a bulk ∼7  mm thick Cu outer shell with three Cu attachment tabs. The cavity was tested up to a peak surface magnetic field of 53 mT in liquid He at 4.3 K. A horizontal test cryostat was designed and built to test the cavity cooled with three Gifford-McMahon cryocoolers. The rf tests of the conduction-cooled cavity, performed at General Atomics, achieved a peak surface magnetic field of 50 mT and stable operation was possible with up to 18.5 W of rf heat load. The peak frequency shift due to microphonics was 23 Hz. These results represent the highest peak surface magnetic field achieved in a conduction-cooled SRF cavity to date and meet the requirements for a 1 MeV energy gain.

10 December 2022 in Water Science & Technology
Verified
Journal Article
Open access
PDF file
RPRobert Pearce
Robert Pearce
XLXi Li
Xi Li
JVJohn Vennekate
John Vennekate
GCGianluigi Ciovati
Gianluigi Ciovati
CBCharles Bott
Charles Bott
Electron beam (e-beam) treatment uses accelerated electrons to form oxidizing and reducing radicals when applied to water without the use of external chemicals. In this study, electron beam treatment was used to degrade 1,4-dioxane in several water matrices. Removal improved in the progressively cleaner water matrices and removals as high as 94% to 99% were observed at a dose of 2.3 kGy in secondary effluent. 1,4-dioxane removal was confirmed to be primarily through hydroxyl radical oxidation. The calculated electrical energy per order was found to be 0.53, 0.26, and 0.08 kWh/m3/order for secondary effluent (Avg. total organic carbon (TOC) 9.25 mg/L), granular activated carbon effluent (TOC 3.46 mg/L), and ultrapure water, respectively, with a 70% generation and transfer efficiency applied.

1 August 2024 in Journal of Applied Physics
Verified
Journal Article
Open access
PDF file
NSN. A. Sultana
N. A. Sultana
YMY. S. Mohammed
Y. S. Mohammed
SPS. J. Pendleton
S. J. Pendleton
JVJ. Vennekate
J. Vennekate
GCG. Ciovati
G. Ciovati
AEA.A Elmustafa
A.A Elmustafa
Beam exit windows are crucial components of any particle accelerator as they provide an interface between the beamline vacuum and target material at atmospheric media. For high beam power machines, special materials and designs are required to withstand high radiation and mechanical loads, while minimizing energy loss during transition and maximizing window lifetime. This research investigates the impact of electron beam exposure to bulk CrMnV and CrMnTiV high entropy alloys (HEAs) with the primary goal of identifying suitable candidate materials for the design of robust and durable exit window settings. The selection criteria include intrinsic characteristics, power dissipation, and mechanical responses. According to the thermodynamic calculations, both equiatomic CrMnV and the addition of 7% of Ti with equiatomic CrMnV yield solid-solutions phases. The structural and mechanical properties of CrMnV and CrMnTiV samples were tested using field emission scanning electron microscopy, atomic force microscopy, scanning electron microcopy with energy dispersive x-ray spectroscopy, x-ray diffraction, and nanoindentation before and after exposure to a dose of ∼66 kGy from a 10 MeV e-beam accelerator. Despite exhibiting beam transmission characteristics comparable to Cr and V, the indentation hardness of HEAs exceeded that of the Cr and V samples by five to six times. The examination of the CrMnTiV irradiated samples revealed organized deformation patterns depicting new features, which we suspect twinning and twin boundaries due to the addition of Ti to CrMnV. Ti, a hexagonal-close-packed crystal structure, is commonly known for deformation twinning behavior.

31 October 2026 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
JVJ. Vennekate
J. Vennekate
JAJ. Armstrong
J. Armstrong
GCG. Ciovati
G. Ciovati
KHK. Harding
K. Harding
AOA. O’BRien
A. O’BRien
TST. Schultheiss
T. Schultheiss

28 August 2025 in Journal of Vacuum Science & Technology B
Verified
Journal Article
Closed access
NSN. A. Sultana
N. A. Sultana
YMY. S. Mohammed
Y. S. Mohammed
JVJ. Vennekate
J. Vennekate
Helmut BaumgartHelmut Baumgart
Helmut Baumgart
AEA.A Elmustafa
A.A Elmustafa
High-energy physics research, industrial sterilizing, and material processing depend extensively on electron beam accelerators. Exit windows are crucial components of such electron accelerator systems, maintaining vacuum integrity inside the machine while providing mechanical strength, thermal stability, and radiation resistance at the beam-target interface. In this study, thin metallic films of Ni, Ti, Cr, and V were explored for use in electron beam exit windows, and their properties were compared with the properties of their bulk counterparts. Simulation results of metal foils predicted Ti to exhibit less beam power dissipation compared to Ni. However, Ni possesses superior mechanical and structural properties compared to Ti. The performance of these films under electron beam irradiation was examined by depositing thin layers of these films on silicon and metallic substrates using magnetron sputtering and exposing them to e-beam irradiation in a controlled setup. The deposited films were subjected to a dose of approximately 66 kGy at a beam energy of 10 MeV and characterized prior to and postexposure to the beam using field emission scanning electron microscopy, atomic force microscopy, x-ray diffraction (XRD), and nanoindentation. Particular emphasis was given to characteristics like the grain structure, surface morphology, dislocation density, and hardness. XRD patterns revealed irradiation-induced changes in peak intensities, while the crystallinity remained largely unchanged. Nanoindentation results showed that the pristine and irradiated Ti and Ni films were twice as hard when compared to bulk Ti and Ni samples, regardless of the substrate type used (Si or bulk Ti, or Ni). These results emphasize the superior mechanical properties of thin metal films compared to their bulk counterparts. This study advances the optimization of thin film materials for robust and efficient e-beam applications, ensuring improved durability and operational reliability.

14 May 2025 in Materials Letters
Verified
Journal Article
Closed access
NSN.A. Sultana
N.A. Sultana
YMY.S. Mohammed
Y.S. Mohammed
JVJ. Vennekate
J. Vennekate
HBH. Baumgart
H. Baumgart
AEA.A Elmustafa
A.A Elmustafa