3 November 2022 in Sports Engineering
The visco-elastic properties of a football influence how it bounces and therefore its performance in a game. Previously, high-speed camera footage has been used to quantify deformation, coefficient of restitution and contact time for an impact between a football and a rigid surface but these systems do not provide any information on the forces acting on the football during the impact. The aim of this study was to determine the repeatability of measuring the peak impact force, impulse, rise time and loading rate for four samples of the same model of football using a commercial force platform (Kistler 9281EA). A football impacted the floor-mounted piezoelectric-type force platform at 6.04 and 19.4 m s−1. High absolute (coefficient of variation (CV) ≤ 10%) and relative (intraclass correlation coefficient (ICC) ≥ 0.94) repeatability was observed for repeated impacts at both velocities. The minimal detectable differences were calculated to evaluate the ability for the force platform to be used to make meaningful comparisons between footballs. For all metrics, the minimum detectable difference accounted for less than 5% of the mean value. Therefore, it can be concluded that provided the difference in impact metrics between football models exceeds the minimal detectable difference, the commercial force platform can be used to measure and detect differences in physical impact metrics between models of footballs.
5 May 2026 in Journal of Sports Analytics
This study aimed to: (1) quantify the accuracy of commercially available computer-vision and artificial intelligence (AI) player tracking software to measure player position, speed and distance covered using broadcast footage and (2) determine the impact of camera feed and resolution on accuracy. Data were obtained from one match at the 2022 Qatar Fédération Internationale de Football Association (FIFA) World Cup. Tactical, programme and camera 1 feeds were used. Three commercial tracking providers that use computer-vision and AI participated. Providers analysed instantaneous position (x, y co-ordinates) and speed (m·s −1 ) of each player. Their data were compared with a high-definition multi-camera tracking system (TRACAB Gen 5). Root mean square error (RMSE) and mean bias were calculated. Position RMSE ranged from 1.68 to 16.39 m, while speed RMSE ranged from 0.34 to 2.38 m·s −1 . Total distance mean bias ranged from −1745 m (−21.8%) to 1945 m (24.3%) across providers. Computer-vision and AI player tracking software offer the best accuracy when players are detected by the software. Providers should use a tactical feed when tracking position and speed, which will maximise player detection, improving accuracy. Both 720p and 1080p resolutions are suitable, assuming appropriate computer-vision and AI models are implemented.
9 April 2026 in Sports Engineering
The playing surface in football plays a pivotal role in player performance, safety, and overall game quality. With evolving regulations and continuous technological advances in football surfaces (natural, hybrid, and artificial turf), understanding their performance characteristics is essential. This study evaluated the vertical compliance and rotational stiffness of football surfaces using two test devices adopted by the FIFA Quality Programme: the Advanced Artificial Athlete and the Rotational Traction Athlete. Measurements were taken from 126 football pitches and turf samples, assessed in-situ and in the laboratory, respectively, which encompassed various natural, hybrid, and artificial turf systems. Results indicated significant differences in vertical compliance, with artificial turfs exhibiting higher peak shock absorption, greater peak deformation, and increased energy return compared to natural and hybrid turfs, suggesting that artificial turfs are more compressible and more elastic. Rotational stiffness measurements revealed that while peak torque values were similar across most surface types, natural and hybrid turfs demonstrated significantly higher resistive torque at 10 degrees of rotation than artificial systems. The findings of this study informed revisions of the performance thresholds adopted within the FIFA Quality Programme, which specify the global quality requirements for football playing surfaces.
16 June 2026 in Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology
This study presents a data-driven exploratory analysis that combines experimental measurements with statistical modelling to investigate how the mechanical properties of a football, specifically stiffness and energy loss, influence a football’s impact behaviour. Experimental testing of twelve FIFA-certified footballs, impacted at low (5.93 ± 0.06 m s −1 ) and high (19.2 ± 0.4 m s −1 ) velocities, revealed three distinct characterisations of impact behaviour. These groupings were primarily defined by contact time and deformation, variables that were strongly correlated with the stiffness properties of the balls, measured in both static and dynamic environments. Multivariable models were developed using inputs of impact conditions and ball properties. For the selected outcome variables (contact time and deformation) and under the conditions tested, these inputs could explain up to 96% of the differences observed in impact behaviour in the best-performing model. The models also demonstrated agreement with observed behaviour in an independent dataset, in this instance errors of 2.8% (corresponding to 0.3 ms) were observed for contact time and errors of 3.4%–9.7% (corresponding to 1–5.5 mm) were observed for deformation. Properties of the footballs measured at the low velocity also demonstrated reasonable consistency in their relationship with dynamic impact behaviours at the higher velocity with errors below 7%. This study demonstrates the use of statistical modelling to classify and explain aspects of football impact behaviour using a small set of measurable properties, within the conditions investigated.