Este artículo presenta una evaluación del desempeño para distintas configuraciones y distribuciones de amortiguadores de fluido viscoso lineal para una estructura de acero de 9 niveles. El diseño de los amortiguadores se realizó mediante los manuales técnicos más utilizados para este tipo de dispositivos. El desempeño del modelo considerado se determinó a través de un análisis dinámico no lineal paso a paso. como demanda sísmica se utiliza la componente EW del registro SCT del temblor de Michoacán de 1985. De los resultados obtenidos se presentan conclusiones para el diseño de amortiguadores de fluido viscoso.
1 January 2022 in Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería
A proposal to estimate both the hydrodynamic pressures and the maximum wave height of liquids contained in rectangular tanks subjected to earthquake ground motions is presented. The computation procedure, based on the Rayleigh-Ritz method, assumes the fluid as a continuum and it does not use concentrated masses or springs. The solution is achieved by equating the seismic input energy of the system with the total kinetic energy of the fluid assuming liquid velocity fields. The resulting design formulas are simple and they are intended to simplify the seismic design of tanks. Numerical results lead to both the liquid maximum sloshing height and hydrodynamic pressure distributions that are similar to those obtained with other simplified methods and those estimated with the finite element method. Preliminary estimations of shear forces and bending moments for a numerical example resulted 13% and 6% larger (respectively) than the corresponding values obtained with the finite element method.