1 December 2022 in Casting Processes
PUPhysico-Technological Institute of Metals and Alloys of the NAS of Ukraine
Physico-Technological Institute of Metals and Alloys of the NAS of Ukraine
The technological features of developed casting-induction method for obtaining threelayer «cast iron-steel-cast iron» castings were studied. The specified method consists in the use of induction heating of a steel billet with a high-frequency electromagnetic field in the casting process for obtaining three-layer products. The paper represents mathematical modeling results of temperature fields distribution under the action of electromagnetic fields on a steel workpiece. The main regularities of steel billet temperature changes depending from the current level and heating time have been established. As a result of simulation modeling, the technological parameters of the steel workpiece heating and cooling process were determined, as well as the pouring of the melt during the production of three-layer castings. Obtained dependences between temperature of the poured melt and temperature of the workpiece are necessary to ensure a high-quality connection between the steel inner part and working layer made of cast iron. The results of the experimental testing confirmed the adequacy of the mathematical modeling of the thermal state of the workpiece, as well as the effectiveness of using the developed combined casting-induction method for obtaining three-layer castings. Keywords: induction casting method, induction heating, simulation modeling, three-layer casting, electromagnetic field, melt.
2 June 2025 in Casting Processes
The research conducted in this work is aimed at optimizing the technological scheme and heating modes of a steel plate moving relative to a concentrated energy source to obtain a flat surface bath of melt under conditions of continuous operation of the heating source. The authors’ efforts were aimed at creating a mathematical model that reflects the real physical process of plasma local heating of the surface of a metal plate, as well as at finding methods for stabilizing the heating process and the uniformity of its parameters in order to use plasma heating under conditions of a continuous technological process. The work presents the results of computational studies of the energy parameters of the plasma jet, the distance of the plasma torch to the treated surface and the time of the plasma torch in the treatment zone or the speed of its movement. The critical and maximum permissible modes of surface heating in an oxidizing environment are established, which satisfy the conditions for obtaining bimetallic products with subsequent pouring of the melt on it of the second layer and liquid-phase connection of the layers. The most rational method of uniform and stable surface heating of a metal plate has been determined. Under given processing conditions, critical values of temperature, time and geometric parameters of the existence of a micrometallurgical bath on the plate surface under the action of a plasma heating source have been determined. The optimal heating parameters have also been determined, which increase the stability and uniformity of this process, and also provide conditions for the creation of a flat surface micrometallurgical bath of the melt of sufficient size and time of its existence - as necessary prerequisites for the entire continuous technological process of manufacturing bimetallic and multilayer products. Дослідження, проведені в цій роботі, спрямовані на оптимізацію технологічної схеми та режимів нагрівання сталевої пластини, яка рухається відносно концентрованого джерела енергії для отримання пласкої поверхневої ванни розплаву в умовах безперервної дії джерела нагрівання. Зусилля авторів були спрямовані на створення математичної моделі, яка відображає реальний фізичний процес плазмового локального нагріву поверхні металевої пластини, а також на пошук методів стабілізації процесу нагрівання, рівномірності його параметрів із метою використання плазмового нагрівання в умовах безперервного технологічного процесу. У роботі представлено результати розрахункових досліджень енергетичних параметрів плазмового струменя, відстані плазмотрона до оброблюваної поверхні та часу дії плазмотрона в зоні обробки або швидкості його переміщення. Встановлені критичні та максимально допустимі режими нагрівання поверхні в окислювальному середовищі, що задовольняють умовам одержання біметалевих виробів при подальшому заливанні розплаву на неї другого шару та рідкофазного з’єднання шарів. Визначено найраціональніший спосіб рівномірного та сталого поверхневого нагрівання металевої пластини. При заданих умовах обробки визначено критичні значення температурних, часових та геометричних параметрів існування мікрометалургійної ванни на поверхні пластини під дією плазмового джерела нагріву. Визначено також оптимальні параметри нагріву, що підвищують сталість та рівномірність цього процесу, а також забезпечують умови створення пласкої поверхневої мікрометалургійної ванни розплаву достатніх розмірів та часу її існування як необхідних передумов для протікання всього безперервного технологічного процесу виробництва біметалічних та багатошарових виробів.