1 September 2020 in Annals of Nuclear Energy
1 November 2021 in Nuclear Technology
The Consortium for Advanced Simulation of Light Water Reactors (CASL) Virtual Environment for Reactor Applications (VERA) is a reactor simulation software. It offers unique capabilities by combining high-fidelity in-core radiation transport with temperature feedback by using MPACT (a deterministic neutron transport code) and COBRA-TF (a thermal-hydraulic code) with follow-on, fixed-source transport calculations using the Shift Monte Carlo code to calculate ex-core quantities of interest. In these coupled calculations, MPACT provides Shift with the fission source for follow-on ex-core calculations. These ex-core simulations can be set up to calculate detector responses, as well as the flux and fluence in ex-core regions of interest, such as the reactor pressure vessel, nozzle, and irradiated capsules. A Watts Bar Nuclear Plant Unit 1 (WBN1) ex-core model was developed, as described in this paper, and this model was used to perform coupon calculations. The results for the coupon flux calculations show close agreement with the reference values for cycle 1 produced by the two-dimensional Discrete Ordinates Transport (DORT) code and presented in a BWXT Services Inc. report. However, differences in the results (10%) seen in cycles 2 and 3 and the reasons for these differences are discussed in this paper. The VERA WBN1 model was also used to perform a vessel fluence calculation for cycle 1. Additionally, a collaboration between CASL and Duke Energy led to the first code-to-code validation of VERA for reactor ex-core applications that used a model for the Shearon Harris reactor. Results from this collaboration show excellent agreement between VERA and the Monte Carlo N-Particle Transport Code for the detector response calculations. The work performed under this collaboration is also detailed in this paper.
22 February 2021 in EPJ Web of Conferences
The Consortium for Advanced Simulation of Light Water Reactors (CASL) Virtual Environment for Reactor Applications (VERA) offers unique capabilities to combine highfidelity in-core radiation transport with temperature feedback using MPACT and CTF with a follow-on fixed source transport calculation using the Shift Monte Carlo code to calculate ex-core quantities of interest. In these coupled calculations, MPACT provides a fission source to Shift for the follow-on radiation transport calculation. In past VERA releases, MPACT passed a spatially dependent source without the energy distribution to Shift. Shift then assumed a 235U Watt spectrum to sample the neutron source energies. There were concerns that, in cases with burned or mixed oxide (MOX) fuel near the periphery of the core, the assumption of a 235U Watt spectrum for the source neutron energies would not be accurate for studying ex-core quantities of interest, such as pressure vessel fluence or detector response. Therefore, two additional options were implemented in VERA for Shift to sample neutron source energies: (1) a nuclide-dependent Watt spectra for 235U, 238U, 239Pu, and 241Pu, and (2) to use the standard 51-energy group MPACT spectrum. Results show that the 51-group MPACT spectrum is not suitable for ex-core calculations because the groups have been fine-tuned for in-core calculations. Differences in relative detector response due to 235U and nuclide-dependent Watt spectra sampling schemes were negligible; however, the use of nuclide-dependent Watt spectra for vessel fluence calculations was found to be important for fuel cycles with burned and fresh fuel.
22 February 2021 in EPJ Web of Conferences
In coupled multiphysics simulations, single pin-averaged values are typically used to describe the temperature, power, and burnup within a given fuel pin. However, since xenon oscillations are largely driven by fuel temperatures, radially dependent quantities have been implemented in the Virtual Environment for Reactor Applications. These radial-shaping functions are based on Zernike polynomial expansions and allow information to pass effectively between codes with differing spatial meshes. This work examines the effects of radial fuel temperature-shaping functions on the behavior of axial xenon oscillations.A test problem was developed from full-core, multi-cycle depletions using as-built fuel data. The center 25 assemblies of the full-core case were used to test the radial-shaping function by inducing an axial xenon oscillation using an instantaneous control rod movement. The test case was run with and without the radial shapes, and each component was also run individually. Including the shaping functions significantly impacted the xenon oscillations for this problem; the magnitude and period of the oscillations were altered, and large pin power and soluble boron differences were observed. Testing each component individually showed that the radial fuel temperature-shaping function had the largest effect.