3 January 2019 in Superconductor Science and Technology
A Conductor on Round Core (CORC ® ) cable wound with a high temperature superconductor is an important cable concept for high current density applications. The design of a CORC cable makes understanding its electromagnetic performance—for example its AC losses—challenging. This paper presents a thorough study of CORC cables by combining experimental and numerical methods. In particular, it focuses on understanding how the cable structure influences the magnetization losses and on how these can be reduced. A novelty of this paper lies in the use of a new T-A formulation, which, for the first time, is employed for three-dimensional modelling of a CORC cable with real geometry. The use of the new T-A formulation in finite element software enables the study of how the winding direction and multiple-layer structure affect the magnetization losses of CORC cables. Moreover, influence of striation in CORC cables is studied as an effective way to reduce their losses. A CORC cable with striated tapes shows a significant magnetization loss reduction at high magnetic fields, in comparison to its counterpart without striated tapes. At low magnetic fields, tape striation leads to an increase in loss when the number of filaments is low, then the loss drops with a further increase in the number of filaments, but this loss reduction is much weaker than that at high fields. This paper provides an efficient tool for investigating the electromagnetic behaviour of CORC cables, which can provide valuable guidance in designing CORC cables with minimized losses for high energy physics and energy conversion applications.
24 June 2019 in Journal of Physics D: Applied Physics
The high-temperature superconductor (HTS) (RE)Ba 2 Cu 3 O
x
(REBCO) conductor on round core (CORC) cable has great advantages with its high current capacity and power density. In REBCO CORC cables, current is redistributed among tapes through terminal contact resistance (TCR) when a local quench occurs. Therefore, its quench behavior is different from the single tape situation. To better understand the underlying physical process of local quenches in CORC cables, a new 3D multi-physics modeling tool for CORC cables is developed and presented in this paper. In this model, the REBCO tape is treated as a thin shell without thickness, and four models are coupled: a T -formulation model, an A -formulation model, a heat transfer model, and an equivalent circuit model. The T -formulation model is applied to the conductor shell only to calculate current distribution, which will be input into the A -formulation model; the A -formulation model is applied to the whole 3D domain to calculate the magnetic field, which is then fed back to the T -formulation model. The hot spot-induced quenches of CORC cables are analyzed. The results show that the thermal stability of the CORC cable can be considerably improved by reducing the TCR. The minimum quench energy (MQE) increases rapidly with the reduction of TCR when the resistance is in a middle range, which is about in this study. When the TCR is too low ( ) or too high ( ), the MQE shows no obvious variation with TCR. With a low TCR, a hot spot in one tape may induce an overcurrent quench on other tapes. This will not happen in a cable with high TCR. In this case, the tape with a hot spot will quench and burn out before inducing a quench on other tapes. The developed modeling tool can be used to design CORC cables with improved thermal stability.
19 February 2019 in IEEE Transactions on Applied Superconductivity
ReBCO conductor-on-round-core (CORC) cable has become a promising candidate for high temperature superconducting (HTS) power applications, due to its great mechanical strength, high current carrying capacity, high flexibility and low AC loss-es. However, ReBCO coated conductors are at risk of quench-ing, which significantly affects the thermal stability and reliabil-ity of the CORC cable. Three-dimensional (3D) numerical study on the quench behavior of the CORC cable remains a challenge, for its complex geometry is difficult to cope with. In this paper, a 3D time-dependent multi-physics quench model based on the T-A formulation has been developed. Three modules are coupled in this model; The T-A formulation model, a heat transfer model and an equivalent circuit model. The quench behavior of a sin-gle-layer ReBCO CORC cable with non-uniform terminal con-tact resistances has been studied, when a hotspot is imposed on one of the tapes to induce a local quench. Results show that, the CORC cable has the highest MQE, in other words, it is the most stable situation, when the hotspot-induced quench occurs on the tape with the middle value of terminal contact resistance.