1 April 2021 in Computer Methods in Applied Mechanics and Engineering
27 June 2016 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
Global navigation satellite system reflectometry is a multistatic radar using navigation signals as signals of opportunity. It provides wide-swath and improved spatiotemporal sampling over current space-borne missions. The lack of experimental datasets from space covering signals from multiple constellations (GPS, GLONASS, Galileo, and Beidou) at dual-band (L1 and L2) and dual-polarization (right- and left-hand circular polarization), over the ocean, land, and cryosphere remains a bottleneck to further develop these techniques. 3 Cat-2 is a 6-unit (3 × 2 elementary blocks of 10 × 10 × 10 cm 3 ) CubeSat mission designed and implemented at the Universitat Politècnica de Catalunya-BarcelonaTech to explore fundamental issues toward an improvement in the understanding of the bistatic scattering properties of different targets. Since geolocalization of the specific reflection points is determined by the geometry only, a moderate pointing accuracy is only required to correct the antenna pattern in scatterometry measurements. This paper describes the mission analysis and the current status of the assembly, integration, and verification activities of both the engineering model and the flight model performed at Universitat Politècnica de Catalunya NanoSatLab premises. 3Cat-2 launch is foreseen for the second quarter of 2016 into a Sun-Synchronous orbit of 510-km height.
17 May 2022 in Journal of Computing and Information Science in Engineering
1 January 2016 in European Journal of Remote Sensing
ACAdriano José Camps Carmona
Adriano José Camps Carmona
+4
This work describes the attitude determination and control system (ADCS) of ³CAT-2, a six-unit CubeSat scheduled for launch this 2016. The ADCS of 3CAT-2 aims at controlling the satellite in orbit and fulfilling the pointing requirements imposed by the mission. The attitude control system implemented in 3CAT-2 will be used to point the antennas towards the Earth to perform altimetry tests, orient the solar panels towards the Sun to maximize power input when battery levels are critical, and reduce the tumbling motion of the satellite after the deployment phase. In order to guarantee pointing requirements for remote sensing purposes, an active three-axis attitude determination and control system is considered.Peer ReviewedPostprint (published version
27 August 2022 in Computer Methods in Applied Mechanics and Engineering