6 April 2016 in IEEE Transactions on Antennas and Propagation
A microfluidically reconfigured wideband frequency-tunable liquid-metal monopole antenna is presented. The antenna operation relies on continuous moving of the liquid-metal volume over the capacitively coupled microstrip line feed network with a micropump unit. To maximize the capacitive coupling at the feed point, the antenna is realized by bonding microfluidic channel molds prepared in polydimethylsiloxane (PDMS) polymer with 1-mil-thick liquid crystal polymer (LCP) substrate. The concept is demonstrated through the design and experimentation of a 4:1 frequency-tunable monopole antenna that operates from 1.29 to 5.17 GHz. The presented monopole antenna can also be utilized as an element to form wideband frequency-tunable high-gain antenna apertures without necessitating any additional micropump units. This is accomplished by resorting to strategically meandered or interconnected microfluidic channels. This concept is demonstrated through the design and experimentation of a 4 × 1 microfluidically controlled monopole array capable of providing 2:1 frequency tuning range from 2.5 to 5 GHz.
1 October 2011 in Biosensors and Bioelectronics
25 June 2012 in Journal of Materials Chemistry
Polyaniline nanowires (PANI) and gold nanoparticle (AuNPs) based hybrid nanocomposite film fabricated onto a Au substrate has been used to fabricate a mediator free immunosensor for the detection of PSA. Microscopic studies reveal uniform distribution of the AuNPs on the PANI backbone resulting in a nanoporous morphology that provides the desired microenvironment for antibody immobilization. The results of electrochemical studies suggest that AuNPs increase the electro-active surface area of PANI and result in high electron transport in a mediator free electrolyte. The AuNP–PANI hybrid nanocomposite also provides a very effective surface for the immobilization of anti-PSA revealing an increase in electron transport that results in improved sensing performance. The electrochemical response of the anti-PSA/AuNP–PANI/Au immunoelectrode as a function of PSA concentration exhibits a linear range of 1 pg mL−1 to 100 ng mL−1, a detection limit of 0.6 pg mL−1 (lower than ELISA), a sensitivity of 1.4 μA M−1 (higher than ELISA) along with a regression coefficient of 98.99%.
8 March 2013 in IEEE Microwave and Wireless Components Letters
A fluidic-based approach for designing tunable coupled resonator bandpass filters is presented. These filters employ broadside coupled split ring resonators (BC-SRR) with one of their open loop resonators constructed from liquid metal. The tuning mechanism is based on dynamically moving the liquid metal to reshape the resonator. To demonstrate the concept, a second order Butterworth filter with continuous tuning range from 650 to 870 MHz is designed and experimentally verified by utilizing PTFE tubing filled with liquid metal and Teflon solution. Due to an inductive external coupling mechanism and 180° rotated resonators, the filter exhibits a near constant 5% fractional bandwidth throughout its tuning range with > 10 dB return and <; 3 dB insertion loss. The filter is realized over a 1.27 mm thick Rogers 6010.2LM substrate and has an approximate footprint of 20 × 40 mm2.
1 June 2015 in IEEE Antennas and Wireless Propagation Letters
A microfluidically controlled frequency-tunable monopole antenna with high RF power-handling capability is presented. Different than previous work, the frequency tunability of this monopole is achieved by using a movable metallized plate inside a microfluidic channel. The monopole is capacitively coupled to a feeding microstrip line through a 12- μm-thick benzo-cyclobutene (BCB) insulator that is used to seal and bond the polydimethylsiloxane (PDMS)-based microfluidic channel to the feed board substrate (RO4003C). It is shown that the presented reconfigurable monopole implemented with the metallized plate, low-loss BCB insulator, and RO4003C board exhibits 200% more power-handling capability as compared to prior implementation that relied on liquid metal, liquid crystal polymer, and RO5880 substrate. The presented monopole provides continuous tuning in the 1.7-3.5 GHz range with a tuning ratio of ~ 2:1. The RF power handling of the antenna is demonstrated through the agreement between multiphysics simulations and experiments conducted under high RF power excitation. The liquid metal free nature of the antenna and using BCB to bond the PDMS-based microfluidic channels with the printed circuit board substrates offer a new approach for realizing reconfigurable devices with higher efficiency and high power-handling capability.
14 October 2010 in IEEE Sensors Journal
In this paper, an interdigitated electrode-less, high performance macroporous silicon-based impedance biosensor has been reported first time for the detection of E.ColiO157. Macroporous silicon of three different pore thickness of around 3, 8, and 12 μm and 55% porosity have been fabricated on a 10-20 Ω-cm wafer using hydrofluoric acid (HF) and dimethyl sulfoxide (DMSO). The samples are next thermally oxidized for partial oxidation of silicon crystallites followed by optimized silanization and antibody immobilization. Two simple gold coated aluminium electrodes of 2 mm by 1 mm dimensions and 1 mm spacing have been fabricated similar to our previous report. It has been observed that the macroporous silicon with 8 μm thickness exhibits the maximum sensitivity of 30% corresponding to 10 4 CFU/ml which is twice compared to the earlier report on macroporous silicon and also it is higher than most of the other reports using IDE structures. The optimized sensor has been found to be reproducible, specific and capable of detecting down to 10 3 CFU/ml with a simple structure. A distributed transmission line model has been developed for macroporous silicon in presence of solution to explain the nature of variation of sensitivity with thickness from the current line confinement effects.