4 September 2018 in IEEE Communications Surveys & Tutorials
The significant growth in the number of WiFi-enabled devices as well as the increase in the traffic conveyed through wireless local area networks (WLANs) necessitate the adoption of new network control mechanisms. Specifically, dense deployment of access points, client mobility, and emerging QoS demands bring about challenges that cannot be effectively addressed by distributed mechanisms. Recent studies show that software-defined WLANs (SDWLANs) simplify network control, improve QoS provisioning, and lower the deployment cost of new network control mechanisms. In this paper, we present an overview of SDWLAN architectures and provide a qualitative comparison in terms of features such as programmability and virtualization. In addition, we classify and investigate the two important classes of centralized network control mechanisms: (i) association control (AsC) and (ii) channel assignment (ChA). We study the basic ideas employed by these mechanisms, and in particular, we focus on the metrics utilized and the problem formulation techniques proposed. We present a comparison of these mechanisms and identify open research problems.
6 August 2019 in IEEE Internet of Things Journal
Increasing the number of IoT stations or regular stations escalates downlink channel access contention and queuing delay, which in turn result in higher energy consumption and longer communication delays with IoT stations. To remedy this problem, this paper presents Wiotap, an enhanced WiFi access point that implements a downlink packet scheduling mechanism. In addition to assigning higher priority to IoT traffic compared to regular traffic, the scheduling algorithm computes per-packet priorities to arbitrate the contention between the transmission of IoT packets. This algorithm employs a least-laxity first (LLF) scheme that assigns priorities based on the remaining wake-up time of the destination stations. We used simulation to show the scalability of the proposed system. Our results show that Wiotap achieves 37% improvement regarding the duty cycle of IoT stations compared to a regular access point. In addition, we developed a testbed to confirm the implementation correctness and the performance benefits of Wiotap in a network with four IoT stations and regular traffic. For the edge and cloud scenarios, our empirical evaluations show up to 44% and 38% improvement in energy and 52% and 41% improvement in delay, respectively.
3 June 2021 in IEEE Transactions on Green Communications and Networking
Enhancing the energy efficiency of WiFi IoT stations introduces unique challenges compared to 802.15.4 and BLE. The four essential operations performed to ensure connectivity between stations and the access point in a WiFi network are association, periodic beacon reception, maintaining association, and station wake up. Understanding and enhancing these operations are essential for building energy-efficient and dependable IoT systems. However, it is unclear how the software and hardware configuration of station and access point, concurrent traffic, power management, and security protocols affect the reliability and energy efficiency of these operations. In this paper, first, we present a thorough analysis of the association cost of WPA2 and WPA3 and mitigate the effect of key computation on association overhead. Second, we prove that increasing listen interval to reduce beacon reception wake-up duration may negatively impact energy efficiency. We identify the primary causes of this problem subject to link quality estimation algorithm and beacon delay. Third, we show that maintaining association by relying on access-point-based polling is not reliable. In particular, we confirm the wake-up delay of low-power stations is highly affected by factors such as channel utilization and beacon listen interval. We also confirm that key renewal aggravates the chance of disassociation.
1 April 2021 in IEEE Systems Journal
The broad deployment of 802.11 (a.k.a. Wi-Fi) access points and the significant energy-efficiency improvement of 802.11 transceivers have resulted in increasing interest in building 802.11-based Internet of Things (IoT) systems. Unfortunately, the power saving mechanisms of 802.11 fall short when used in IoT applications, especially because they do not take into account the delays caused by various factors, such as buffering, interference, and round-trip delay. In this article, we present edge-assisted predictive sleep scheduling (EAPS) to adjust the sleep duration of stations while they are expecting downlink packets. We first implement a Linux-based access point that enables us to collect parameters affecting communication latency. Using this access point, we build a testbed that, in addition to offering traffic pattern customization, replicates the characteristics of real-world environments. We then use multiple machine learning algorithms to predict downlink packet delivery. Our empirical evaluations confirm that with EAPS, the energy consumption of IoT stations is as low as power save mode, whereas the delay of packet delivery is close to the case where the station is always awake.