25 September 2017 in Advanced Materials Technologies
MMMatteo Gregorio Modesto Marascio
Matteo Gregorio Modesto Marascio
27 June 2014 in Journal of Reinforced Plastics and Composites
The mechanical and damping properties were measured for unidirectional, 0/90 and twill 2/2 flax fibre (FF) composites containing 40 vol% of fibres in an epoxy matrix. All composites were processed by resin transfer moulding. The influence of the impregnation quality, the fibre/matrix adhesion, the quality of the fibres, the twist angle of the FF yarns and the crimp in the FF fabrics on these properties were quantified. Twisted yarns in an unidirectional FF fabric impacted negatively on the stiffness while increasing the damping of about 57% through enhancement of the intra-yarn friction. In twill 2/2 fabrics, twisted yarns decreased Young's modulus owing to the induced crimp but increased the damping through enhanced inter-yarn friction. With improved fibre/matrix adhesion, a damping increase up to 109% was obtained through better activation of the intrinsic damping mechanisms of an elementary FF. The best compromise between damping and stiffness was obtained with FF having less dislocations.
12 July 2012 in Journal of Cellular Plastics
CPChristopher John G Plummer
Christopher John G Plummer
This paper describes the production of “green” microfibrillated cellulose-reinforced polylactide cellular biocomposites using a wet mixing technique combined with supercritical carbon dioxide foaming. The effect of composition on the morphology, density and compression modulus of foams was investigated for different processing parameters, along with the use of a chain extender to modify the melt elasticity. Foams with mean densities ranging from 0.18 to 0.32 g/cm3 were obtained for the neat polylactide and polylactide/5 wt% microfibrillated cellulose, respectively, and there was a corresponding increase in compressive modulus from 25 to 47 MPa. The addition of the chain extender is argued to compensate the molar mass loss induced by the different processing steps, promoting more uniform foam structures and allowing a density reduction of up to 75%.
28 March 2020 in Soft Matter
This work presents a novel strategy that combines microgel and composite approaches in order to enhance some hydrogel's properties such as swelling, elastic modulus and processing ease as well as to decouple their interdependence.
1 September 2002 in Composites Part A: Applied Science and Manufacturing
8 July 2021 in Soft Matter
Granular hydrogels with high stability, strength, and toughness are laborious to develop. Post-curing is often employed to bind microgels chemically and enhance mechanical properties. Here a unique strategy was investigated to maintain microgels together with a novel self-reinforced silk granular hydrogel composed of 10 wt% 20 kDa poly(ethylene glycol) dimethacrylate microgels and regenerated silk fibroin fibers. The principle is to use the swelling of microgels to concentrate the surrounding solution and regenerate silk fibroin in situ. Self-reinforcement is subsequently one of the added functions. We showed that silk fibroin in most compositions was homogeneously distributed and had successfully regenerated in situ around microgels, holding them together in a network-like structure. FTIR analysis revealed the presence of amorphous and crystalline silk fibroin, where 50% of the secondary structures could be assigned to strong β-sheets. Swelling ratios, i.e. 10–45 vol%, increased proportionally with the microgel content, suggesting that mainly microgels governed swelling. In contrast, the elastic modulus, i.e. 58–296 kPa, increased almost linearly with silk fibroin content. Moreover, we showed that the precursor could be injected and cast into a given shape. Viscous precursors of various compositions were also placed side by side to create mechanical gradients. Finally, it was demonstrated that silk granular hydrogel could successfully be synthesized with other microgels like gelatin methacryloyl. Silk granular hydrogels represent, therefore, a novel class of self-reinforced hydrogel structures with tunable swelling and elastic properties.