17 February 2025 in Biofabrication
Best cosmetic outcomes of breast reconstruction using tissue engineering techniques rely on the scaffold architecture and material, which are currently both to be determined. This study suggests an approach for a rational design of breast-shaped scaffold architecture, in which structural analysis is implemented to predict its stiffness and adjust it to that of the native tissue. This approach can help achieve the goal of optimal scaffold architecture for breast tissue engineering. Based on specifications defined in a preliminary implantation study of a non-rationally designed scaffold, and using analytical modeling and finite element analysis, we rationally designed a polycaprolactone made, 3D-printed, highly porous, breast-shaped scaffold with a stiffness similar to the breast adipose tissue. This scaffold had an architecture of a double-shelled dome connected by pillars, with no bottom to allow direct contact of its fat graft with the host’s blood vessels (shelled hemisphere adaptive design (SHAD)). To demonstrate the potential of the SHAD scaffold in breast tissue engineering, a proof-of-concept study was performed, in which SHAD scaffolds were embedded with human adipose derived mesenchymal stem cells, isolated from lipoaspirates, and implanted in nod-scid-gamma mouse model with a delayed fat graft injection. After 4 weeks of implantation, the SHAD implants were vascularized with a viable fat graft, indicating the suitability of the SHAD scaffold for breast tissue engineering.
14 August 2025 in Small Methods
The influence of mechanical signals on sprouting angiogenesis has been of interest in the field of tissue engineering and biomechanics. Here, a unique experimental methodology is developed to apply mechanical loading on an engineered macro‐vessel model to study the influence on angiogenic sprouting. The polydimethylsiloxane (PDMS) stretchable device contains an engineered macro‐vessel embedded within a collagen matrix. The model is loaded either parallel or perpendicular to the macro‐vessel (longitudinal or lateral, respectively). A finite element analysis is performed to characterize the strain maps of the PDMS‐collagen setup. The results indicate high uniform strain around the macro‐vessel perimeter under longitudinal loading, while lateral loading results in low strain in the horizontal direction and high strain along the vertical direction. Experimental results for lateral loading show increased sprouting events and capillary orientation in the stretch direction following the organization of matrix fibers, while longitudinal loading results in sprouting inhibition. These findings allow prediction of angiogenic sprouting under specified mechanical loading profiles and may serve as a tool to rationally design and control vascular network architecture by physical means. Finally, the presented approach can serve as a platform for studying cell behavior under mechanical loading for any physiological tubular duct or vessel model.