Jay Pathak

Jay Pathak

Auto-generated profile, based on publicly available information

Jay Pathak

Sardar Vallabhbhai National Institute of Technology

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 April 2019 in IET Circuits, Devices & Systems
Verified
Journal Article
Open access
PDF file
JPJay Pathak
Jay Pathak
ADAnand Darji
Anand Darji
Silicon fin field‐effect transistor (FinFET) devices with gate–source/drain underlap fin length ( L un ) structures have been used for effective reduction in short channel effects (SCEs) from many years. Here, investigations have been performed on the FinFET structure with In 0.53 Ga 0.47 As material. Three‐dimensional technology computer‐aided design simulations for 14 nm channel length In 0.53 Ga 0.47 As FinFETs with underlap have been conducted by incorporating various effects to analyse the influence of interface traps on the device. The dominance of traps is investigated on SCE and intrinsic delay to assess the trend on underlap devices. The impact on threshold voltage and on current due to metal gate work function (MGWF) variation has been also demonstrated. Simulations have been carried out for L un = 0, 3, 6, and 9 nm with interface trap density of 10 12 and 10 14 cm –2 eV –1 . Improvement in the subthreshold swing (SS) is observed as the L un increases but at the cost of intrinsic delay. However, the improvement in SS after L un = 6 nm is nearly constant. It has been also observed that the relative standard deviation of the threshold voltage and on current variation due to MGWF variation improves as the L un increases till 6 nm after that this improvement is not very significant.

21 December 2017 in Communications in Computer and Information Science
Verified
Book Chapter
Closed access
PDF file
JPJ. Pathak
J. Pathak
ADA. Darji
A. Darji

1 April 2019 in Journal of Nanoelectronics and Optoelectronics
Verified
Journal Article
Closed access
JPJay Pathak
Jay Pathak
ADAnand Darji
Anand Darji
InGaAs is known to be the most promising III–V compound semiconductor for realizing high-speed FinFET in the upcoming sub-14 nm technology node. The mismatch of the lattice constants have an unavoidable effect in the form of interface traps when a dielectric layer is intended to be integrated in the InGaAs FinFETs. Quantum corrected drift diffusion model along with density gradient approach were used to perform the simulation for 14 nm channel length In0.53Ga0.47As FinFETs to analyse the effect of the interface traps. The technique presented in this paper improves the on-current and delay of the InGaAs n-FinFET by means of introducing an additional In0.52Al0.48As barrier layer. Interface traps effect were analysed for the doped and the undoped In0.52Al0.48As barrier layer in InGaAs FinFETs. Parameters namely subthreshold slope, drain induced barrier lowering, on-current and delay were assessed to measure the improvement based on the proposed technique. For an interface trap density of 1012 cm–2 eV –1 with doping concentration of 1017 cm–3 in In0.52Al0.48As shows an improvement of 4.5% in the on-current as compared to the undoped. Further, the propagation delay is reduced by 18.3% as compared to its counterpart.

13 April 2019 in International Journal of Electronics
Verified
Journal Article
Closed access
JPJay Pathak
Jay Pathak
ADAnand Darji
Anand Darji
CMOS based high speed applications in the sub-14 nm technology node using InGaAs FinFETs confronts with inevitable effect in the form of interface traps upon integration of dielectric layer with the InGaAs material. In this work, we have explored the impact of the traps on short channel effects (SCEs) and a technique of abating the effect of interface traps by introducing In  0.52Al  0.48As cap layer. Quantum corrected drift diffusion and density gradient models have been used to perform the simulation for 14 nm channel length In  0.53Ga  0.47As nFinFETs. The proposed work reforms the device by varying the cap layer thickness (T  cap), doping concentrations of cap layer and underlap region. The effect of traps on intrinsic delay, work function variation and SCEs were investigated to assess the trend on devices with In  0.52Al  0.48As cap layer. It has been observed that introduction of T  cap improves SCEs and helps to mitigate the effect of interface traps. Besides, the SCEs furthermore decreases by increasing T  cap. Apart from that, the SCEs can be additionally diminished by presenting underlap fin length at the cost of higher delay. The experimental results show that the value of subthreshold swing= 149.54 mV/decade, drain induced barrier lowering= 38.5 mV/V and delay= 1.1 ps for T  cap= 4 nm without underlap fin length structure for traps concentration of 10  12 cm  −2eV  −1. Thus significant improvement has been seen in SCEs and delay performance in FinFET structure with cap layer as compared to without cap layer.

10 September 2022 in arXiv
Verified
Preprint
Open access
PDF file
RRRishikesh Ranade
Rishikesh Ranade
HHHaiyang He
Haiyang He
JPJay Pathak
Jay Pathak
NCNorman Chang
Norman Chang
AKAkhilesh Kumar
Akhilesh Kumar
JWJimin Wen
Jimin Wen
Thermal analysis provides deeper insights into electronic chips behavior under different temperature scenarios and enables faster design exploration. However, obtaining detailed and accurate thermal profile on chip is very time-consuming using FEM or CFD. Therefore, there is an urgent need for speeding up the on-chip thermal solution to address various system scenarios. In this paper, we propose a thermal machine-learning (ML) solver to speed-up thermal simulations of chips. The thermal ML-Solver is an extension of the recent novel approach, CoAEMLSim (Composable Autoencoder Machine Learning Simulator) with modifications to the solution algorithm to handle constant and distributed HTC. The proposed method is validated against commercial solvers, such as Ansys MAPDL, as well as a latest ML baseline, UNet, under different scenarios to demonstrate its enhanced accuracy, scalability, and generalizability.