Mike Müller-Petke

Mike Müller-Petke

Auto-generated profile, based on publicly available information

Mike Müller-Petke

LIAG Institute for Applied Geophysics, Hannover, Germany

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 May 2016 in Geophysics
Verified
Journal Article
Closed access
MMMike Müller-Petke
Mike Müller-Petke
MBMartina Braun
Martina Braun
MHMarian Hertrich
Marian Hertrich
SCStephan Costabel
Stephan Costabel
JWJan Walbrecker
Jan Walbrecker
MRSmatlab is a manufacturer-independent software tool for processing, modeling, and inversion of surface nuclear magnetic resonance data. Intended as an open platform, MRSmatlab has been growing over the past few years by connecting researchers and making the latest research available to the community. We have developed insights into yet unpublished numerical implementations of signal processing and complex inversion. In addition, we have evaluated a field example demonstrating the need to carefully inspect all the steps of handling surface nuclear magnetic resonance data. MRSmatlab can be obtained by contacting the authors.

18 March 2015 in Geophysics
Verified
Journal Article
Closed access
MMMike Müller-Petke
Mike Müller-Petke
RDRaphael Dlugosch
Raphael Dlugosch
JLJochen Lehmann-Horn
Jochen Lehmann-Horn
MRMathias Ronczka
Mathias Ronczka
The pore-size distribution (PSD) of geologic materials is an important rock parameter to understand the flow of water in the subsurface. PSDs can be obtained from sieving analyses, mercury porosimetry measurements, and imaging techniques, but none of these methods is available for in situ measurements. Nuclear magnetic resonance (NMR) measurements are controlled by rock parameters such as the surface-area to pore-volume ratio. NMR is available for in situ measurements. State-of-the-art NMR relaxation time measurements need a calibration of the surface relaxivity ρ to extract pore-size information. State-of-the-art NMR diffusion measurements avoid the calibration of ρ but are limited to small pores. We developed an approach that estimates the average pore size without calibrating ρ by means of incorporating higher order modes into the signal interpretation of NMR relaxation times. We conducted forward-modeling studies using an analytic solution for cylindrical tubes, 2D finite-element simulations to incorporate fractal pore spaces, and laboratory experiments on synthetic and natural samples. Our experimental data indicated that relaxation can occur outside the fast-diffusion regime not only for coarse-grained materials, but also for fine- to medium-grained unconsolidated sandy materials due to high surface relaxivities. We found that the rock-fluid interface’s roughness had a significant impact on the diffusion regime and led to an apparent increase in ρ, which may cause intermediate or slow diffusion. The methodology was limited to materials with a narrow PSD and uniform distribution of ρ because we assumed multiexponential decay due to diffusion in single isolated pores.

1 November 2020 in Geophysics
Verified
Journal Article
Open access
CJChuandong Jiang
Chuandong Jiang
JIJan Igel
Jan Igel
RDRaphael Dlugosch
Raphael Dlugosch
MMMike Müller-Petke
Mike Müller-Petke
TGThomas Günther
Thomas Günther
JWJutta Winsemann
Jutta Winsemann
Geophysical methods can characterize aquifer systems noninvasively and are particularly helpful to image the complex depositional architecture of the subsurface. Among these, ground-penetrating radar (GPR) is an effective tool for detailed investigations of shallow subsurface geometry, but it provides only limited information on hydraulic properties. Magnetic resonance tomography (MRT) provides parameters such as water content (porosity) and relaxation time/hydraulic conductivity, but it suffers from resolution limits. Furthermore, it requires knowledge of subsurface electrical resistivity, which can be obtained by electrical resistivity tomography (ERT) also suffering from resolution limits. To overcome the limitations in resolution, we have incorporated GPR reflectors as structural information into the ERT and MRT data inversion. We test the methodology on a synthetic example and find improved imaging properties compared to standard inversion, particularly at greater depths, where the resolution is limited. We apply the methodology to a test site that is characterized by a complex depositional architecture. The Quaternary deposits consist of interbedded meltwater deposits (aquifers) and till (aquitards), overlain by aeolian deposits. To image the subsurface depositional architecture in three dimensions, a 200×250 m area was surveyed by GPR. The use of GPR constraints clearly improves the resolution and zonation of the subsurface image, which is validated by drill-core analyses. We develop a workflow to combine GPR, MRT, and ERT, leading the way to high-resolution hydrogeologic models that can be used for groundwater studies.

8 March 2018 in Hydrology and Earth System Sciences
Verified
Journal Article
Open access
PDF file
SCStephan Costabel
Stephan Costabel
CWChristoph Weidner
Christoph Weidner
MMMike Müller-Petke
Mike Müller-Petke
GHGeorg Houben
Georg Houben
The capability of nuclear magnetic resonance (NMR) relaxometry to characterise hydraulic properties of iron-oxide-coated sand and gravel was evaluated in a laboratory study. Past studies have shown that the presence of paramagnetic iron oxides and large pores in coarse sand and gravel disturbs the otherwise linear relationship between relaxation time and pore size. Consequently, the commonly applied empirical approaches fail when deriving hydraulic quantities from NMR parameters. Recent research demonstrates that higher relaxation modes must be taken into account to relate the size of a large pore to its NMR relaxation behaviour in the presence of significant paramagnetic impurities at its pore wall. We performed NMR relaxation experiments with water-saturated natural and reworked sands and gravels, coated with natural and synthetic ferric oxides (goethite, ferrihydrite), and show that the impact of the higher relaxation modes increases significantly with increasing iron content. Since the investigated materials exhibit narrow pore size distributions, and can thus be described by a virtual bundle of capillaries with identical apparent pore radius, recently presented inversion approaches allow for estimation of a unique solution yielding the apparent capillary radius from the NMR data. We found the NMR-based apparent radii to correspond well to the effective hydraulic radii estimated from the grain size distributions of the samples for the entire range of observed iron contents. Consequently, they can be used to estimate the hydraulic conductivity using the well-known Kozeny–Carman equation without any calibration that is otherwise necessary when predicting hydraulic conductivities from NMR data. Our future research will focus on the development of relaxation time models that consider pore size distributions. Furthermore, we plan to establish a measurement system based on borehole NMR for localising iron clogging and controlling its remediation in the gravel pack of groundwater wells.

5 May 2020 in Journal of Applied Geophysics
Verified
Journal Article
Open access
PDF file
MMMike Müller-Petke
Mike Müller-Petke
Surface-NMR measurements commonly suffer from low signal-to-noise ratios. In recent years, with the introduction of multi-channel surface-NMR instruments, the technique of remote-reference noise cancellation (RNC) was developed and significantly improved the applicability of surface-NMR. The current formulation of RNC requires a reference loop to be placed a remote distance from the transmitter loop such that no NMR signal is recorded. Reference loops placed at non-remote distances have been envisaged to provide both improved noise cancellation performance and field efficiency; however, the concept has not been previously applied because the theoretical framework was missing. In this paper, the theoretical framework is presented. It is demonstrated that reference loops placed at non-remote distances provide superior noise cancellation performance. Considerations for placing the reference loop relative to the transmitter loop are provided, and the theoretical framework is evaluated based on a semi-synthetic example using real field noise and synthetic surface-NMR data.

13 May 2016 in Geophysics
Verified
Journal Article
Closed access
DGDenys Grombacher
Denys Grombacher
MMMike Müller-Petke
Mike Müller-Petke
RKRosemary Knight
Rosemary Knight
To produce reliable estimates of aquifer properties using surface nuclear magnetic resonance (NMR), an accurate forward model is required. The standard surface NMR forward model assumes that excitation occurs through a process called on-resonance excitation, which occurs when the transmit frequency is set to the Larmor frequency. However, this condition is often difficult to satisfy in practice due to the challenge of accurately determining the Larmor frequency within the entire volume of investigation. As such, in situations where an undesired offset is present between the assumed and true Larmor frequency, the accuracy of the forward model is degraded. This is because the undesired offset leads to a condition called off-resonance excitation, which impacts the signal amplitude, phase, and spatial distribution in the subsurface, subsequently reducing the accuracy of surface NMR estimated aquifer properties. Our aim was to reduce the impact of an undesired offset between the assumed and true Larmor frequency to ensure an accurate forward model in the presence of an uncertain Larmor frequency estimate. We have developed a methodology where data are collected using two different transmit frequencies, each an equal magnitude above and below the assumed Larmor frequency. These data are combined, through a method we refer to as frequency cycling, in a manner that allow the component well-described by our estimate of the Larmor frequency to be stacked coherently, whereas the component related to the presence of an undesired offset is combined destructively. In synthetic and field studies, we have determined that frequency cycling is able to mitigate the influence of an undesired offset providing more accurate estimates of aquifer properties. Furthermore, the frequency-cycling method stabilized the complex inversion of surface NMR data, allowing advantages associated with complex inversion to be exploited.