Laboratory for Biointerfaces, Empa, Swiss Federal Laboratories for Materials Science and Technology, Lerchenfeldstrasse 5, 9014 St. Gallen, Switzerland; Department of Earth- and Environmental Sciences, Ludwig Maximilian University of Munich, Theresienstrasse 41, 80333 Munich, Germany
Auto-generated profile, based on publicly available information
Mengdi Liu
Laboratory for Biointerfaces, Empa, Swiss Federal Laboratories for Materials Science and Technology, Lerchenfeldstrasse 5, 9014 St. Gallen, Switzerland; Department of Earth- and Environmental Sciences, Ludwig Maximilian University of Munich, Theresienstrasse 41, 80333 Munich, Germany
To avoid excessive usage of antibiotics and antimicrobial agents, smart wound dressings permitting controlled drug release for treatment of bacterial infections are highly desired. In search of a sensitive stimulus to activate drug release under physiological conditions, we found that the glass transition temperature (Tg) of a polymer or polymer blend can be an ideal parameter because a thermal stimulus can regulate drug release at the physiological temperature of 37 °C. A well-tuned Tg for a controlled drug release from fibers at 37 °C was achieved by varying the blending ratio of Eudragit® RS 100 and poly(methyl methacrylate). Octenidine, an antimicrobial agent often used in wound treatment, was encapsulated into the polymer blend during the electrospinning process and evaluated for its controlled release based on modulation of temperature. The thermal switch of the nanofibrous membranes can be turned “on” at physiological temperature (37 °C) and “off” at room temperature (25 °C), conferring a controlled release of octenidine. It was found that octenidine can be released in an amount at least 8.5 times higher (25 mg·L–1) during the “on” stage compared to the “off” stage after 24 h, which was regulated by the wet Tg (34.8–36.5 °C). The “on”/”off” switch for controlled drug release can moreover be repeated at least 5 times. Furthermore, the fabricated nanofibrous membranes displayed a distinctive antibacterial activity, causing a log3 reduction of the viable cells for both Gram negative and positive pathogens at 37 °C, when the thermal switch was “on”. This study forms the groundwork for a treatment concept where no external stimulus is needed for the release of antimicrobials at physiological conditions, and will help reduce the overuse of antibiotics by allowing controlled drug release.
To control material-associated bacterial infections, understanding the underlying mechanisms of bacteria and surface interactions is essential. Here we focused on studying how material mechanical and chemical properties can impact bacterial adhesion, using polydimethylsiloxane (PDMS) as a model material. To this end, PDMS surfaces of different stiffness were coated with a 2 nm highly cross-linked PDMS-like polymer film to confer comparable surface chemistry, while retaining similar mechanical properties for coated and uncoated samples. The uncoated samples showed increased interfacial adhesion force with the decrease of Young's modulus, whereas the nanolayer deposition yielded a comparable adhesion force for all surfaces. The Gram negative strains Escherichia coli, its fimbriae mutants and Pseudomonas aeruginosa as well as the Gram positive strain Staphylococcus epidermidis were analysed for their adhesion on these surfaces. For each bacterial strain similar numbers were found on the coated surfaces of different PDMS species, whereas the numbers on the uncoated surfaces increased several fold with the decrease of material modulus. Similar adhesion behaviour was also observed for the negatively charged abiotic polystyrene beads of similar size to bacteria. These results strongly suggest that the interfacial chemistry of the PDMS rather than the material mechanical properties plays a critical role in bacterial adhesion.
16 April 2022 in Journal of Colloid and Interface Science
Bacterial infections related to medical devices can cause severe problems, whose solution requires in-depth understanding of the interactions between bacteria and surfaces. This work investigates the influence of surface physicochemistry on bacterial attachment and detachment under flow through both empirical and simulation studies. We employed polydimethylsiloxane (PDMS) substrates having different degrees of crosslinking as the model material and the extended Derjaguin - Landau - Verwey - Overbeek model as the simulation method. Experimentally, the different PDMS materials led to similar numbers of attached bacteria, which can be rationalized by the identical energy barriers simulated between bacteria and the different materials. However, different numbers of residual bacteria after detachment were observed, which was suggested by simulation that the detachment process is determined by the interfacial physicochemistry rather than the mechanical property of a material. This finding is further supported by analyzing the bacteria detachment from PDMS substrates from which non-crosslinked polymer chains had been removed: similar numbers of residual bacteria were found on the extracted PDMS substrates. The knowledge gained in this work can facilitate the projection of bacterial colonization on a given surface.
14 August 2019 in The Journal of Physical Chemistry B