Thermally activated shape memory polymers are typically programmed by initially heating the material above the glass transition temperature ( Tg), deforming to the desired shape, cooling below Tg, and unloading to fix the temporary shape. This process of deforming at high temperatures becomes a time-, labor-, and energy-expensive process while applying to large structures. Alternatively, materials with reversible plasticity shape memory property can be programmed at temperatures well below the glass transition temperature which offers several advantages over conventional programming. Here, the free, partial, and fully constrained recovery analysis of cold-programmed multi-walled carbon nanotube–reinforced epoxy nanocomposites is presented. The free recovery analysis involves heating the temporary shape above Tg without any constraints (zero stress), and for fully constrained recovery analysis, the temporary shape is held constant while heating. The partially constrained recovery behavior is studied by applying a constant stress of 10%, 25%, and 50% of the maximum recovery stress obtained from the completely constrained recovery analysis. The samples are also characterized for their thermal, morphological, and mechanical properties. A non-contact optical strain measurement method is used to measure the strains during cold-programming and shape recovery. The different recovery behaviors are analyzed by using a thermo-viscoelastic–viscoplastic model, and the predictions are compared with the experimental results.
Conventional shape memory programming involves, heating the material above the glass transition temperature (Tg), deforming to the desired shape, cooling below Tg and unloading to fix the temporary shape. However, for applications in large scale structures (e.g. deployable space structures), this process of deforming at high temperatures becomes a time, labor and energy expensive process. The reversible plasticity shape memory (RPSM) effect is an alternate programming approach wherein the material is plastically deformed (cold programmed) to a temporary shape at temperatures well below the transition temperature, preferably at room temperature. In this paper, the shape memory behavior of cold-programmed carbon-fiber reinforced carbon-nanotube (CNT)/epoxy laminates is investigated. The addition of carbon-fiber in a cold-programmable epoxy matrix resulted in significant changes in the glass-transition temperature and subsequently in the cold-programmability of the composites. So, in order to realize RPSM effect at room temperature, trials were made to optimize the glass transition region of the composites by varying the material constituents. Specimens of different laminate configurations with/without CNT reinforcement were fabricated to study the shape-memory behavior under flexure. The addition of 1wt% CNT resulted in a slight increase in Tg but had no effect on the cold-programmability of the composites. Results reveal that all specimens show 100% shape-recovery. The laminate configuration had a considerable effect on the shape-fixity since the initial elastic recovery after unloading is dominated by the fiber reinforcement. CNT addition resulted in an improvement or no effect in shape-fixity and mechanical properties depending on the laminate configuration.