Kwong-Kit Choi

Kwong-Kit Choi

Auto-generated profile, based on publicly available information

Kwong-Kit Choi

Banpil Photonics, Inc. (United States)

Research Focus & Metrics

Academic Career Length

25Years (2002-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 December 2011 in IEEE Journal of Quantum Electronics
Verified
Journal Article
Closed access
KCKwong-Kit Choi
Kwong-Kit Choi
MJMurzy D. Jhabvala
Murzy D. Jhabvala
DFDavid P. Forrai
David P. Forrai
AWAugustyn Waczynski
Augustyn Waczynski
JSJason Sun
Jason Sun
RJRobert Jones
Robert Jones
Rigorous electromagnetic field modeling is applied to calculate the quantum efficiency of various quantum well infrared photodetector (QWIP) geometries. We found quantitative agreement between theory and experiment for corrugated-QWIPs, grating-coupled QWIPs, and enhanced-QWIPs, and the model explains adequately the spectral lineshapes of the quantum grid infrared photodetectors. After establishing our theoretical approach, we used the model to optimize the detector structures for 12-micron pixel pitch focal plane arrays.

28 January 2002 in Applied Physics Letters
Verified
Journal Article
Closed access
AMAmlan Majumdar
Amlan Majumdar
KCK. K. Choi
K. K. Choi
LRL. P. Rokhinson
L. P. Rokhinson
DTD. C. Tsui
D. C. Tsui
Two-color quantum-well infrared photodetectors (QWIPs), based on electron transfer between coupled QWs, suffer from the presence of the shorter wavelength peak at all bias voltages Vb. We investigate this problem by studying the bias dependence of absorption coefficient α and photoconductive gain g as a function of wavelength at 10 K. We fabricate such a detector with a peak wavelength of 8 μm for both bias polarities but a voltage tunable cutoff wavelength (9 μm for Vb>0 and 11 μm for Vb0 and 10 μm for Vb<0. g has a pronounced peak at 7.8 μm for both bias polarities and determines the line shape of the QWIP spectral responsivity. These results are attributed to insufficient electron transfer between the coupled QWs and to low tunneling probability of the longer wavelength photoelectrons. A modified QWIP structure has been proposed for complete switching of spectral responsivity peak when the bias voltage polarity is reversed.

30 January 2002 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
JMJ. Mao
J. Mao
AMAmlan Majumdar
Amlan Majumdar
KCK. K. Choi
K. K. Choi
DTD. C. Tsui
D. C. Tsui
KLK. M. Leung
K. M. Leung
GVG. A. Vawter
G. A. Vawter
Rigorous electromagnetic modeling based on a modal solution of the pertinent boundary-value problem was performed to study the light coupling mechanism in quantum grid infrared photodetectors with lamellar patterns. Our theory shows that vertical field component and absorption quantum efficiency η can be strongly enhanced by judiciously adjusting the width w of individual grid lines. This enhancement is further increased if the top of the grid lines is covered by metal, which behave as a collection of dipole scatterers. We have experimentally verified the dipole scattering characteristics with different w, and found that the variation of η agrees very well with the theory. We also found that, as expected, the conductivity of the metal strips affects η significantly due to internal dissipation.

5 April 2021 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
JBJordan Budhu
Jordan Budhu
NPNicole A. Pfiester
Nicole A. Pfiester
KCKwong-Kit Choi
Kwong-Kit Choi
SYSteve Young
Steve Young
Christopher BallChristopher Ball
Christopher Ball
AGAnthony Grbic
Anthony Grbic
In an infrared photodetector, noise current (dark current) is generated throughout the volume of the detector. Reducing the volume will reduce dark current, but the corresponding smaller area will also reduce the received signal. By using a separate antenna to receive light, one can reduce the detector area without reducing the signal, thereby increasing its signal-to-noise ratio (SNR). Here, we present a dielectric resonator antenna (DRA)-coupled infrared photodetector. Its performance is compared to a conventional resonant cavity-enhanced slab detector. The noise equivalent power (NEP) is used as a figure of merit for the comparison. Formulas for the NEP are derived for both cases. A pBp photodiode detector is assumed in the comparison. The active region of the photodiode is an InAs/GaSb Type II Superlattice (T2SL). A Genetic Algorithm is used to optimize the dimensions of the detector and the DRA to achieve the smallest NEP. The result is a photodetector that converts over 85% of the incident light into carriers with a volume reduced by 95%. This optimal geometry leads to an NEP reduced by 6.02 dB over that of the conventional resonant cavity-enhanced slab detector.

2 June 2021 in IEEE Journal of Quantum Electronics
Verified
Journal Article
Closed access
KCKwong-Kit Choi
Kwong-Kit Choi
ADAchyut K. Dutta
Achyut K. Dutta
NDNibir K. Dhar
Nibir K. Dhar
For mid-wave infrared detectors, we designed a meta-surface to enhance quantum efficiency (QE) across 2 to 6 microns. The relative enhancement depends on the intrinsic absorption coefficient α of the material. If α is large at 2×104/cm, a 0.1 micron-thick meta-detector can yield a peak QE of 90%, which is 2.6 times higher than the conventional detector. The improvement is larger with a smaller α. When it is 2000/cm, the improvement is about 10 times with a peak QE of 49%. For energy harvesting devices, we designed several nanostructures etched on top of silicon solar cells to enhance their absorption. Employing an array of nano-columns increases absorption from 55% to 97% at 0.7 microns and from 5.0% to 37% at 1.0 microns. An array of nano-cones further increases the average absorption to 95% between 0.4 to 0.8 microns. The overall integrated absorption is increased by 74% for nano-columns and 92% for nano-cones. For GaAs solar cells, a metasurface can improve photocurrent by 26% from a planar solar cell with a 100 nm-thick absorber.

1 October 2019 in AIP Advances
Verified
Journal Article
Open access
PDF file
NDNaresh C. Das
Naresh C. Das
KCK. K. Choi
K. K. Choi
There are potential applications for high operating temperature (HOT) Hg1-xCdxTe (MCT) infrared (IR) devices for both defense and commercial applications. MCT absorption can be raised either by increasing the absorber thickness or by lowering the operating temperature. However, if we can increase MCT absorption by using plasmonic materials, it will help in both HOT operation and increasing signal to noise ratio. We studied three Gold (Au) plasmonic structures for the absorption enhancement of MCT materials in the wavelength band of 3-7 μm. By using RF module in COMSOL multiphysics software, we found a large increase (1.85X) of MCT absorption when the optimized Au plasmonic structure is used. The increase in absorption at 4.5-6 μm is higher than that at 3-4 μm. The increased absorption due to plasmonic structure allows absorber thickness to decrease which leads to decrease in dark current and HOT devices. We report here record 90% increase in absorption of MCT material at room temperature at peak wavelength around 3.4 μm by using optimized plasmonic structure.