The results of the mathematical modeling of a liquid flow in a mixing vessel with a turbine impeller are presented in the paper. The calculations were carried out using the numerical codes of Computat
This paper presents investigation results of polyacrylamide synthesis with combined polymerization and drying. First, polyacrylamide synthesis was carried out in concentrated aqueous solutions of acrylamide at 30°C. Polymerization was initiated by K2S2O8/Na2S2O3 an oxidation–reduction system. The monomer conversion degree at this stage did not exceed 80%. Further, polymerization with simultaneous solvent elimination from the prepolymer was carried out in a dryer with infrared heat supply and natural convection. Such conditions provide monomer conversion degree up to 100%.
In this study, a new model for the fluidized bed coating process is presented. The model allows to predict the degree of coverage of solid particles. Analytical solutions of model equations for batch apparatus and for continuous apparatus operated in the steady-state mode were obtained. An algorithm for the numerical solution of model equations for multistage apparatus was developed. To identify the parameters of the developed mathematical model and to verify its adequacy, a physical experiment was conducted on a laboratory scale installation. A comparison of calculated and experimental data was performed. Good agreement is observed between the modeling and the measurements.
1 January 2015 in Russian Journal of Applied Chemistry