11 April 2019 in IEEE Journal of Emerging and Selected Topics in Power Electronics
A voltage source converter is necessary for micro-grid to maintain the appropriate voltage and frequency. A low-voltage ride-through strategy based on improved current droop is proposed in this paper, and this strategy can enable the converter to ride through voltage sag faults at the point of common coupling (PCC). Current droop is implemented by active current-frequency control and reactive current-voltage control without the need for power calculation and without an overcurrent beyond the active current. The reactive power support function is provided by regulating the reactive current. To resolve the problems of power-angle instability and slow response of current recovery after a fault, a power-angle-limiting controller is proposed. The lagging-loop controller is employed to constrain the power angle within a certain range around the prefault steady-state value so that the converter can ride through the transient state smoothly and recover to the prefault state rapidly. The proposed strategy is verified by simulations and experiments.
25 September 2025 in Sensors and Actuators A: Physical
5 March 2025 in IEEE Transactions on Instrumentation and Measurement
In this work, a packaging scheme for electromagnetic vibration energy harvester is designed and implemented, in order to achieve resonant frequency tuning and magnetic shielding simultaneously. The proposed packaging scheme is realized by the combination of a soft magnetic tuning component and housing. A proof-of-concept electromagnetic vibration energy harvester prototype is fabricated to verify the proposed functionality, capable of realizing targeted frequency tuning and shielding magnetic field. The fabricated energy harvester prototype achieves a tuning range of 112-192 Hz (71.4%). Compared to the traditional frequency-tuning method based on permanent magnet, the proposed approach realizes a quasi-linear, accurate, and targeted tuning process with optimal tuning range. In addition, the proposed packaging scheme also shields the magnetic interference between the energy harvester and external environment, which is crucial for its application in industrial scenarios.