1 July 2017 in Tribology International
20 February 2020 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
In this study, the pneumatic hammer instability phenomena in the aerostatic journal bearing–rotor system is analysed and discussed for different feeding hole configurations theoretically and experimentally. The influences of the configuration of the feeding holes on the nonlinear dynamics of the system are also investigated. The air flow between the surfaces is modelled with Reynold’s equation and it is numerically solved with differential transform and finite difference hybrid method. Three different aerostatic bearings are modelled and simulated to investigate the ınfluences of the configuration of the holes for different angular speeds. An experimental test rig is designed and tested for different rotor speeds to validate the obtained numerical results. The dynamic response of the system is analysed using waterfall plots, bifurcation diagrams, orbit plots, phase portrait and Poincaré map, which are drawn to determine the pneumatic hammer instability region of the modelled system. The results reveal a nonlinear dynamic response of the rotor centre. In addition, the analysis shows that the feeding hole configuration affects the rotor dynamics and the pneumatic hammer instability region.
16 September 2024 in Ocean Engineering
8 March 2021 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
Aerostatic journal bearing applications mainly focus on high-speed precision machining, so predictable and smooth functioning of the system is crucial. Air is supplied to the bearing through a number of orifices and any unevenness in the size of these orifices will affect the performance of the system. The size difference could be due to manufacturing error and/or blockage of the orifice because of foreign materials in the air system. In this study, the performance of an aerostatic bearing with a partially blocked orifice is numerically investigated. Firstly, the airflow in the bearing clearance was modeled with Reynolds equation and this equation was numerically solved with the finite difference and differential transform hybrid method to obtain the pressure distribution. Then, the force and the stiffness are calculated from the pressure distribution for different blockage cases of the orifice and different blockage ratios. The results show that the partial blockage of the orifice significantly changes the performance of the system in a positive or a negative way according to the feeding hole position, and the blockage ratio also affects performance.
1 July 2025 in Archive of Applied Mechanics
The new development of nanotechnology proposes cost-effective and upgrading solutions for tribological characteristics of the lubricant. One of these solutions is the coexistence of two or more types of nanoparticles known as hybrid nanoparticles. This work presents useful results of research on the performance features of the circular journal bearings operated with SAE30/TiO2-MWCNTs (SAE 30-grade base oil blended with titanium dioxide and multi-walled carbon nanotube hybrid nanoparticles) hybrid nanolubricant. In this study, the mathematical model of the lubricant with hybrid nanolubricant is based on the Dowson equation and three-dimensional heat transfer equations. Furthermore, the thermophysical specifications of the hybrid nanoparticle are formulized in terms of characteristics of the base lubricant, TiO2, and MWCNTs, as well as an empirical formula for the viscosity–temperature relationship. To obtain bearing performance features, a series simulation is conducted under various volume and mass fractions of hybrid nanoparticle and operational conditions (a range of eccentricity ratio from 0.05 to 0.8 and a range of rotating speed from 1000 to 9000 r/min) with a developed algorithm for the iterative solution. The results showed that the effect of the hybrid nanoparticles on the maximum pressure and the load capacity are more visible at high eccentricity ratio, and nanolubricants could increase the load capacity, maximum pressure, and friction force till 11%, 13%, and 15%, respectively. Besides, when the bearing operates with a lubricant containing MWCNTs-TiO2, the pressure values are higher than the lubricant containing solely MWCNTs nanoparticles by 0.2%, while they are lower than the lubricant containing solely TiO2 nanoparticles by 1%.
30 November 2023 in Journal of Thermal Engineering
Bearing performance characteristics such as stiffness, and load capacity, are related to the lubrication fluid circulating through the gap. In the fluid film bearings, the characteristic of the lubrication film also depends on the journal geometry and the viscosity. This study aimed to research the bearing geometry influences on the thermohydrodynamic performance of a circular journal bearing. The temperature distribution is modeled using a 3-dimensional energy equation. The velocity components are obtained on the pressure distribution governed by Dowson’s equation. Moreover, the heat transfer between the journal and oil is modeled with Fourier heat conduction equation, and the viscosity equation is derived for SAE10W30 commercial oil as a function of the temperature. An algorithm based on the finite difference method is developed, and a serial simulation is performed for different geometrical parame-ters such as bearing clearance, and bearing length-to-diameter ratio (L/D). When the radial clearance decreases from 150 µm to 100 µm, the maximum pressure grows up by 53%, and the maximum temperature decreases by 21%. On the other hand, when the L/D ratio rises from 0.8 to 1, the maximum pressure grows up by 22%, but the temperature distribution does not significantly change. The load capacity, and the stiffness are higher for low radial clearance. The load capacity, and the stiffness increase when the L/D ratio grows up.