Gaëlle Belleau-Magnat

Gaëlle Belleau-Magnat

Auto-generated profile, based on publicly available information

Gaëlle Belleau-Magnat


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 January 2025 in Planetary and Space Science
Verified
Journal Article
Open access
GBGaëlle Belleau-Magnat
Gaëlle Belleau-Magnat
MLMyriam Lemelin
Myriam Lemelin
ECEdward Cloutis
Edward Cloutis
RLRichard Léveillé
Richard Léveillé

2 July 2026
Verified
Conference Paper
Open access
GBGaëlle Belleau-Magnat
Gaëlle Belleau-Magnat
MLMyriam Lemelin
Myriam Lemelin
MWMarie-Claude Williamson
Marie-Claude Williamson
RLRichard Léveillé
Richard Léveillé
ÉBÉloïse Brassard
Éloïse Brassard
SCSean Clark
Sean Clark
IntroductionMartian analogue environments provide valuable opportunities to investigate the preservation of biosignatures and to refine strategies for their detection on Mars. Reactive gossans in permafrost - such as those found in the Canadian Arctic - constitute potential Martian analogues because of mineralogical similarities observed between terrestrial gossans and orbital or rover-based observations on Mars. Gossans are the superficial expression of sulfide-bearing rocks that have undergone chemical weathering through interaction with oxygenated groundwater. Gossans constitute one of the few iron-rich aqueous environments known to provide a habitable setting on Earth and potentially on Mars [1]. Previous studies have proposed that gossans, or related processes involving the chemical alteration of sulfide minerals, may have occurred on Mars in the past and that some of these reactions could persist today within the Martian permafrost [e.g. 2, 3, 4, 5].The Terrestrial Mineral Analysis by Remote Sensing (T-MARS) project investigated Arctic gossans located at the head of Expedition Fiord, Axel Heiberg Island, Nunavut, Canada (Fig. 1) [6]. It included the detection and study of gossans from orbit to the ground using instrumentation relevant to present and upcoming Mars exploration missions. The scientific objectives were (1) to characterize their geochemistry and mineralogy; and (2) understand their formation processes. The operational objectives were (3) to develop strategies for detecting and studying them on Earth and Mars; and (4) to detect potential biosignatures.MethodsPrior to field work Before the field campaigns, target gossans were selected according to both their accessibility and their scientific relevance. A principal component analysis (PCA) was applied to a WorldView-2 image. A colour composite was then generated using the principal components showing the strongest contrast between the eigenvector values associated with the original red and blue bands referring to the red/blue ratio often used to detect iron oxides (Fig. 1). Previously identified gossan sites helped identify additional potential outcrops for field investigation on the colour composite. A slope map was used to assess the accessibility of the selected sites.Field work Two field campaigns to Expedition Fiord on Axel Heiberg Island, NU were carried out in July 2022 and July 2023 in the vicinity of the McGill Arctic Research Station. The investigated gossans were sampled both at the surface and at depth through vertical trenches. Both sterile and non-sterile sampling procedures were applied depending on the selected follow up laboratory protocols. A HySpex SWIR-384 hyperspectral camera was used to image gossan occurrences and evaluate the potential of this technology as a reconnaissance tool for mineral mapping. A drone was also deployed to examine hard‑to‑reach areas and to capture broader views of outcrops that were not visible from the ground (Fig. 2).Laboratory analyses Samples were characterized using elemental analyses for sulfur, nitrogen and carbon, together with X-ray diffraction and X-ray fluorescence techniques [7, 8, 9]. Additional measurements included loss on ignition, pH, and SEM-EDX analyses. Sterile samples were also investigated for lipid biosignatures through n-alkane quantification by gas chromatography–mass spectrometry [7], as well as for organic carbon content using Raman spectroscopy [8]. Spectroscopic measurements were acquired with rover-mountable instruments, including visible to near-infrared reflectance spectroscopy and mid- to thermal-infrared diffuse reflectance spectroscopy.Remote sensing The VNIR reflectance spectra were used as endmembers for the Spectral Feature Fitting algorithm in ENVI to identify gossan occurrences in WorldView-2 and PRISMA imagery [9].Results and discussionElemental and spectroscopic analyses revealed mineral assemblages and oxidation gradients characteristic of gossans [10, 11, 12], with twenty-four mineral phases identified. Gypsum and quartz were common across all sites. Variations in primary sulfides and secondary sulfates indicate different oxidation stages, from actively weathering gossans to fully oxidized systems dominated by secondary sulfates. Organic carbon and potential lipid biosignatures were detected at depth. Classic gossan stratigraphy, with an oxidized surface layer over an unoxidized horizon, was observed at several sites, alongside additional stratification patterns ranging from distinct layering to strong heterogeneity (Fig. 3).The results suggest that these gossans formed through alteration of primary sulfides in diabase/gabbro intrusions or from mobilized evaporitic sulfates, likely driven by paleohydrothermal activity or fluid circulation associated with the emplacement of sills in the host sedimentary rocks.Field and laboratory observations made in this study indicate that successful identification of gossans on Mars will likely depend on targeting faulted regions where fracturing may have increased permeability, focusing on erosion-resistant ridges, using high-resolution orbital data and detecting co-located iron sulfides, oxides and sulfates.Figure 1. Geology of the Expedition Fiord area, Nunavut. A) Location of Axel Heiberg Island in the Canadian Arctic Islands. B) Location of the McGill Arctic Research Station on Axel Heiberg Island. C) Footprint of the study area. Basemap for insets A-B-C: Esri World Imagery (2025). D) PCA colour composite. Figure modified after [6].Figure 2: Multi-scale field images. A) Contextual overview of a sampling location acquired by drone. The white arrow indicates the gossan center shown in B (people present in the image for scale). B) Drone image of the gossan center, where a trench was excavated. C) Image captured by a team member on the ground showing gossan sampling. Figure from [6].Figure 3: Stratification patterns observed in trenches. A) Classical gossan stratigraphy...

2 July 2026
Verified
Conference Paper
Open access
MLMyriam Lemelin
Myriam Lemelin
LMLéonard Martinez
Léonard Martinez
GCGuilhem Calas
Guilhem Calas
ALAbigaëlle Lagneaux
Abigaëlle Lagneaux
MRMathieu Roy
Mathieu Roy
DBDavid T. Blewett
David T. Blewett
IntroductionLunar Vertex, NASA’s first Payloads and Research Investigations on the Surface of the Moon (PRISM) delivery, will explore the Reiner Gamma lunar swirl (Figure 1) (Blewett et al., 2025). Swirls consist of high and low albedo variations in the form of loops and ribbons sometimes associated with crustal magnetic “anomalies”. Different hypotheses have been proposed to explain the presence of swirls (summarized in Blewett et al., 2021), including magnetic shielding of the surface from the darkening effects of the solar wind, scouring by gas and dust during the collision of a comet's coma or a meteoroid swarm, and accumulation of fine-grained dust in response to magnetic or electric fields associated with the magnetic anomaly. Studies have investigated the photometric properties of the uppermost regolith at swirls without reaching a consensus regarding their origin but suggest that solar wind shielding and dust levitation/sorting may both play a role (e.g., Denevi et al., 2016; Chrbolková et al. 2019; Kinczyk et al., 2025). Geomorphological studies suggest that on-swirl regions are lower than the off-swirl region by ~4 m at Reiner Gamma (Weirich et al., 2023), supporting the dust migration hypothesis, or local topographic variations pre-dating the formation of the swirls.In this study, we investigate potential differences in regolith properties between on-swirl and off-swirl regions at Reiner Gamma to provide context for the Lunar Vertex mission. Our first objective is to quantify morphometric parameters from the bowl-shaped crater population to investigate potential dust migration mechanisms which may contribute to preferential crater infill on-swirl, or different regolith properties. Our second objective is to estimate regolith thickness using the non-bowl-shaped crater population to see if variations in local regolith thicknesses exist, and in turn, if dust migration mechanisms or differences in pre-impact topography could contribute to these variations.Datasets and methodsWe trained and used a YOLOv5-based model (e.g., Bickel et al., 2025) to detect craters across Reiner Gamma in hillshade images derived from Lunar Reconnaissance Orbiter (LRO) Narrow Angle Camera (NAC) digital terrain models (DTMs) at spatial resolutions from 2 to 5 meters. We developed “MorphoPy”, a Python-based automated crater morphology characterization tool (Martinez et al., 2026), which calculates morphometric parameters (e.g., depth, diameter, wall slope, rim slope, circularity, eccentricity, freshness) on DTMs for craters that have 36 semi-profiles each containing 10 valid measurements. Morphometric parameters are calculated for craters with a diameter (D) equal to or larger than 20 times the spatial resolution of the input DTM, here D≥40 m. In parallel, we manually identified non-bowl-shaped craters (e.g., flat floored, concentric craters, mound) in LROC NAC images on Quickmap and estimated regolith thicknesses using the formula of Bart et al. (2011).Figure 1. Map of Reiner Gamma showing the location of NAC DTMs used to investigate crater morphology overlain by the intensity of the magnetic field (Ravat et al., 2020) (swirl outline from Denevi et al., 2016).Preliminary resultsThe YOLOv5 algorithm identified ~70 000 craters, and “MorphoPy” calculated morphometric parameters for ~25 000 of those. To investigate a subset of the freshest primary craters, we extracted values for craters having a circularity ≥ 0.9, opposite rim slope < 8˚ and a measurable rim for ≥ 50% of their half-profiles. Plots of depth versus diameter values (Figure 2) suggest that most of the freshest primary craters in the Reiner Gamma region have d/D values centered around ~0.1, especially for strength-dominated craters (D < 400 m). Depth versus diameter trends suggest that off-swirl craters are systematically deeper (hence have higher d/D values) than their on-swirl counterpart for a given crater diameter. Analyses will be conducted next to see if the trends are statistically different.Figure 2. Depth versus diameter values for the freshest on-swirl and off-swirl craters in DTMs of different spatial resolution (solid line d/D=0.2, dashed line d/D=0.1, dotted line d/D=0.05).We identified 918 non-bowl-shaped craters on Quickmap, and calculated regolith thickness for the 503 craters that exhibit a clear rim (apparent diameter, DA) and “inner feature” (measured at the base of the normal crater wall slope, DF). Bart et al. (2014) suggest that craters where DF/DA varies between 0.2 and 0.7 and where DA < 300 m are well suited to infer regolith thickness. In our case, 467 craters respect such values (296 off swirl, 171 on swirl) and yield a mean regolith thickness of 6.6 m off-swirl versus 6.1 on-swirl and median values of respectively 4.1 and 4.2 m. These values are consistent with those reported for mare surfaces (3.1–7.8 m; Cooper et al., 1974; Nakamura et al., 1975; Bart et al., 2011). The “regolith thickness” values calculated range between ~1 and 50 m. Impact craters that encounter a strength transition in the target have non-bowl-shaped morphologies. The strength transition can be a layer of regolith over bedrock but can also be a strength transition farther beneath the surface such as layering in the basalt (Bart et al, 2014). A hot spot analysis (Getis-Ord Gi) on the 467 regolith thickness measurements suggests that some high (hot spot) and low (cold spot) regolith thickness values cluster spatially and are statistically significant. Hot spots mostly occur on-swirl and towards the southern portion of Reiner Gamma, while cold spots mostly occur off-swirl and towards the northern portion of Reiner Gamma. The region at ~7.5˚N, 59.5˚W notably exhibits cold spots (regolith thickness values on the order of 1-3 m) in proximity to hot spots (“regolith thickness” or strength contrast at 5-50 m).Figure 3....

2 July 2026
Verified
Conference Paper
Open access
BFBasile-Vladimir Fauconnier
Basile-Vladimir Fauconnier
MLMyriam Lemelin
Myriam Lemelin
BCBernard Charlier
Bernard Charlier
ABAdelphine Bonneau
Adelphine Bonneau
GBGaëlle Belleau-Magnat
Gaëlle Belleau-Magnat
Characterization of the geochemistry and organic content of Martian analog environments (reactive gossans) in the Canadian Arctic to assess their astrobiological potential.1. ContextThe past existence of potentially habitable environments on Mars [1-4] raises the question of whether any organic and mineralogical biosignatures have been preserved within the weathered Martian rock formations. However, the extreme physicochemical conditions prevailing on the surface of Mars, combined with oxidation and weathering processes, considerably complicate the identification and interpretation of such signatures [5-7].In this context, the study of Mars analog environments is an essential approach for better understanding the interactions between geochemistry, mineralogy, and the preservation of organic matter under Mars-like conditions [5,8-11]. Among these, reactive gossans of the Canadian Arctic are of particular interest. These formations, resulting from the oxidation of sulfide deposits and subject to seasonal chemical weathering in a permafrost environment, constitute geochemically active environments capable of supporting sustained microbial activity [5,8,9,12-15]. Since similar conditions may have existed on Mars, these systems represent relevant analogs for studying Martian astrobiological potential and identifying preserved biosignatures.This work aims to characterize the geochemistry and organic content of reactive gossans to assess their astrobiological potential and their relevance for interpreting future in situ observations of Mars.2. Method2.1 Field samplingTwo field campaigns were conducted on Axel Heiberg Island, Nunavut, to investigate six reactive gossans sites [12,13]. We focus on three of them: Color Ridge (CR-G3), White Glacier (WG-G1), and White Glacier Vein Array (WGVA-G1). Sampling was conducted at the surface and at depth to characterize the geochemical and organic evolution of the various strata. Six strata were sampled at CR-G3, four at WG-G1, and 12 at WGVA-G1. Sterile and non-sterile sampling protocols were applied depending on the planned laboratory analyses. Samples were stored at subzero temperatures to minimize the alteration of organic carbon.2.2 Laboratory analysesQuantitative and semi-quantitative characterizations included elemental analyses of sulfur, carbon, and nitrogen using an elemental analyzer; loss-on-ignition measurements to determine total organic carbon, total inorganic carbon, and total carbon; and pHmeasurements in aqueous and saline solutions. Mineralogical and geochemical analyses were performed using WDXRF, XRD, and SEM-EDX. SEM-EDX analyses enabled the characterization of the elemental composition and mineralogy of structures or anomalies observed at the microscopic scale.Qualitative characterizations were based on Raman spectroscopy, XRD, WDXRF, and SEM-EDX. Raman spectroscopy was used to identify mineral phases and to detect the D and G bands associated with the presence of organic carbonaceous material. An application was developed in-house to automate the interpretation of Raman spectra.Some samples were metallized for observation under an SEM to identify any fossilized microstructures that might be associated with ancient microbial activity. This exploratory approach also aimed to assess the potential of this instrumentation for detecting morphological biosignatures in this type of Martian-analog environment.3. ResultsPreliminary results reveal significant geochemical, mineralogical, and organic heterogeneity among the three gossans studied. pH measurements show a marked contrast between the sites, with highly acidic conditions for CR-G3 (pH 2.2-2.7), acidic to near-neutral conditions for WG-G1, and neutral to slightly alkaline conditions for WGVA-G1. This variability reflects different degrees of oxidation and weathering within the profiles, linked to the reactivity of the sulfide phases.Elemental analyses of sulfur, carbon, and nitrogen also reveal significant differences between sites and strata. CR-G3 exhibits the highest and most variable sulfur contents, suggesting the persistence of residual sulfides and/or the formation of secondary sulfates. Carbon contents measured by elemental analysis remain generally low, while nitrogen remains near detection limits, indicating a low contribution of nitrogenous organic matter. At the same time, loss-on-ignition measurements show mass losses that are sometimes more significant, which can be interpreted as a contribution from total organic carbon or carbonates depending on the temperature ranges considered. However, a discrepancy is observed between the results from elemental analysis and those obtained by loss on ignition. This difference indicates that the losses measured during heating do not exclusively reflect organic matter but may also be related to the dehydration of hydrated phases, the transformation of sulfates, or the decomposition of certain carbonate phases. These results highlight the need for a combined interpretation of elemental, mineralogical, and thermal data to better constrain the origin of mass losses and the actual preservation of organic carbon in these environments.The WDXRF data indicate a composition dominated by SiO₂, Al₂O₃, and Fe₂O₃, with local enrichments in CaO, Na₂O, MgO, and SO₃ depending on the location. CR-G3 is characterized by high variability in Fe₂O₃, consistent with the oxidation of iron-rich sulfide phases. XRD analyses confirm this contrasting mineralogy, with a matrix dominated byalbite, with residual pyrite and secondary phases such as bassanite/gypsum, barite, and jarosite. The presence of jarosite is particularly significant, as it indicates acidic and oxidizing conditions relevant to altered Martian environments.Raman and SEM-EDX analyses complement these observations by revealing fine mineral phases, Fe-S-rich structures, and potential carbon signatures, notably through the presence of D...